To share the drain hole with an existing washing machine (applicable No Pump models only)
To share one drain hole with an existing washing machine, use the drain T adaptor.
1.Connect the drain hose (A) of the sanitizing washing machine
to one end of the drain T adaptor (B).
2.Insert the drain hose (C) of the existing washing machine in its drain adaptor (D).
For a fully automatic washing machine, please skip steps 2 and 3, and go directly to step 4.
AB
B C
3.Use cable ties to tighten the joint if loose.
D C
4.Connect the drain hose (C) of the existing washing machine
to the drain T adaptor (B).
5.Insert the drain T adaptor to the drain hole (E) as shown.
E
CAUTION
•If the drain T adaptor does not fit in the drain hole, water may leak around the drain hole.
•Ensure that the drain T adaptor covers the drain hole.