Problem | Checkpoints | Action | |
|
|
| |
| If the water supply hose | Repeat the assembling steps | |
| connector at the tap is loose, | again. | |
| water can leak. | (Refer to “Step 2 - Connect the | |
|
| water supply hose” on page 10) | |
|
|
| |
| Check if the rubber ring in the | Move it into the correct position. | |
Water leaks at the | water supply hose connector is in |
| |
water supply hose | the right position. |
| |
connector. | Check if the water supply hose is | Straighten the hose. | |
| twisted. |
| |
|
|
| |
| If the water supply is too strong, | Adjust the tap so less water flows | |
| water may leak. | into the supply hose. | |
|
|
| |
| Check if the water is leaking is | Fix the tap. | |
| from the tap itself. |
| |
|
|
| |
| Check if the laundry is spread out | Spread out the laundry evenly and | |
| evenly in the washing machine. | start again. | |
|
|
| |
There are loud noises | Check if the washing machine | Ensure that the washing machine | |
is balanced and on a sturdy, flat | is leveled. | ||
and vibrations when | |||
surface. |
| ||
spinning. |
| ||
|
| ||
Ensure that the washing machine | Move anything unnecessary away | ||
| |||
| is not surrounded by unnecessary | from the washing machine. | |
| items. |
| |
|
|
|
English - 33
TROUBLESHOOTING