Samsung WB25H7000GS/YL manual Connect the water supply hose

Step 2 - Connect the water supply hose

1.Connect the L-shaped arm fitting for the cold water supply hose to the cold water supply intake at the upper rear side of the washing machine. Then tighten it by turning part (A) clockwise by hand.

(*): applicable models only

2.Remove the adaptor (B) from the other end of the water supply hose (C).

3.Loosen the four screws on the adaptor using a Philips screwdriver.

4.Connect the adaptor to the water tap by tightening all the

screws firmly while lifting the adaptor upwards.

5.Connect the water supply hose to the adaptor. If you push part (D) into the adaptor, the hose automatically connects to the adaptor with a clicking sound.

After connecting the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

WARNING: Check if the water supply hose is not twisted or bent. If the hose is twisted or bent, water may leak, causing electric shock. If necessary, straighten the water supply hose by loosening the L-shaped arm fitting, rotating the hose, and retightening the L-shaped arm fitting.

A

B

C

D

English - 10

Untitled-6 10

2014-11-26 ￿￿ 5:02:05