Rinsing, Over Flow Rinse, Additional Rinse

RINSING

1. Set the CYCLE SELECTOR KNOB to ‘WASH RINSE’. (In case drain pump “WASH”)

2.Supply the proper amount of water as not to overflow the top of the washing tub.

1.Keep suppling water

Adjust water pressure to ensure that the amount of water supplied

(Without pump)

(With pump)

2.Set the WASH TIMER 6~8minutes.

3. Set the WASH TIMER 2~3minutes.

4. Drain the water. Set the CYCLE SELECTOR KNOB to ‘DRAIN’

5.Repeat this cycle until drain water is clean. (2~3 cycles)

3.As soon as the WASH TIMER shuts off, turn off the water tap.

4.Set the CYCLE SELECTOR KNOB

to ‘DRAIN’.

1	After rinsing you can select this		After stopping water
	course for more effective rinse		After stopping water
	course for more effective rinse		4 supply, cover the
	(Don't select only this course	inner lid	4 supply, cover the
	for rinse.) Load the laundry	safety cover	laundry with safety cover
	evenly into the spin basket.	safety cover	and close the inner lid.
	evenly into the spin basket.		and close the inner lid.
	Set the WATER SELECTOR KNOB to		5 lid.Close the spin dryer
2 SPIN and CYCLE			5 lid.Close the spin dryer
	SELECTOR KNOB to
	‘DRAIN’.
	Supply water for about 1minute.		Set the SPIN DRY
3 Adjust the water flow to prevent			6 TIMER 2~3 minutes.
	overflow from the wash tub.