Completing the SET UP

2.Tighten the compression nut ( B ) onto the compression fitting.

Do not over-tighten the compression nut ( B ).

3.Turn the water on and check for any leaks inside the refrigerator, around the water filter, and in any connection areas.

If you find water drops or leaks, turn off the main water supply.

If the leaks are in the connection areas, check the connections and, if necessary, tighten.

If there are leaks in the refrigerator, check the water filter and confirm it is in the locked position.

Turn on the water supply and check for leaks again.

4.Plug in the refrigerator.

5.Flush 3 gallons of water through the filter before drinking or using the water from the refrigerator. (Flush approximately 6 minutes.)

This will clean the water supply system and remove air from the lines.

To flush, press the Water button, and then press a large glass or cup against the water dispenser lever. Fill the glass, empty it into the kitchen sink after it is filled, and then repeat.

Additional flushing may be required in some households.

6.Open the refrigerator door and make sure there are no water leaks coming from the water filter.

•After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days.

Over that period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure all impurities have been removed from the water line.

•Only connect the water line to a drinkable water source.

•If you have to repair or disassemble the water line, cut off 6.35 mm of the plastic tubing to make sure you get a snug, leak-free connection.

•You can test the water line quickly using a paper cup.

Under normal conditions, the water dispenser can fill a 5.75 oz. (170 cc) cup in about 10 seconds.

Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance.

By completing the following steps, your refrigerator should be fully operational.

1.Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual.

2.Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3.Set the Temperature control to the coldest temperature and wait for an hour.

The freezer will get slightly chilled and the motor will run smoothly.

Reset the refrigerator and freezer to the temperatures you want.

4.After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature.

You can store food and drinks in the refrigerator after the temperature is sufficiently cool.

If condensation or water drops appear on both sides of the fridge door’s central part, turn the Energy Saver mode off after removing the condensation.

(See the explanation of the Energy Saver button in “Using the Control Panel” on page 26.)

Preventing Power Cord Damage

To prevent power cord damage, fix any excess power cord to the top rear of the refrigerator as shown in the illustration below.

English - 24

DA68-02981C-00.indb 24

2014. 1. 28.

�� 10:47

RS25H5223SL/ZA specifications

The Samsung RS25H5223SL/ZA is a feature-rich side-by-side refrigerator designed to meet the needs of modern households. With its stylish stainless steel exterior, it not only complements any kitchen decor but also offers durability and easy maintenance. This refrigerator has a generous capacity of 25 cubic feet, providing ample storage space for groceries and essentials.

One of the key features of the RS25H5223SL/ZA is its Twin Cooling System. This innovative technology utilizes two separate evaporators for the fridge and freezer compartments, resulting in optimal humidity levels and preventing the mixing of odors. This ensures that fruits and vegetables remain fresh longer, while ice cream stays perfectly frozen, maintaining its texture and flavor.

Energy efficiency is an essential consideration for many consumers, and this model excels in that department. The RS25H5223SL/ZA is Energy Star certified, which means it consumes less energy compared to non-certified models. This helps consumers save on energy bills while also being environmentally friendly.

Another notable characteristic is the external water and ice dispenser, which allows for convenient access to chilled water and ice cubes without having to open the refrigerator door. The dispenser features a sleek design and is easy to use, making it a practical addition for busy families.

The interior of the refrigerator is thoughtfully designed with adjustable shelving, spill-proof glass shelves, and humidity-controlled crisper drawers. These elements allow for customizable organization, making it simple to store items of various sizes while keeping everything easily accessible.

In terms of user convenience, the RS25H5223SL/ZA is equipped with LED lighting, which illuminates the interior more efficiently than traditional bulbs. The energy-efficient LED lights provide better visibility, allowing users to find their favorite snacks and ingredients with ease.

In conclusion, the Samsung RS25H5223SL/ZA is a reliable and stylish refrigerator that combines innovative technologies with practical features. Its spacious capacity, Twin Cooling System, energy efficiency, external water and ice dispenser, and well-designed interior make it an excellent choice for any household looking to enhance their kitchen functionality. Whether you're storing fresh produce, frozen meals, or entertaining guests, this refrigerator delivers performance and convenience, ensuring your food stays fresh and your kitchen remains organized.