Samsung PH50KPPLBF/SM PowerSaver When used as a Network PDP Display, Preset Timing Modes

Specifications

	CPU	RAM	Ethernet	OS	Application
Recommended	P3.0 GHz 512 M		100 M / 1	Windows	WMP 9 or
			G	XP	later

PowerSaver

This PDP Display has a built-in power management system called PowerSaver. This system saves energy by switching your PDP Display to low-power mode when it has not been used for a certain amount of time. The PDP Display automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your PDP Display OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.

PowerSaver (When used as a Network PDP Display)

	State		Normal Oper-	Power saving	Power off
			ation	mode	EPA/ENERGY
					2000
Power Indicator			Green	Green, Blink-	Red
				ing
Power Consump- P42HP			380 W	Less than 5	Less than 5
tion				watts	watts
		P50HP	470 W

PowerSaver (When used as a normal PDP Display)

	State		Normal Oper-	Power saving	Power off
			ation	mode	EPA/ENERGY
					2000
Power Indicator			Green	Green, Blink-	Red
				ing
Power Consump- P42HP			380 W	Less than 2	Less than 2
tion				watts	watts
		P50HP	470 W

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows.

Display Mode	Horizontal	Vertical Fre-	Pixel Clock	Sync Polarity
	Frequency	quency (Hz)	(MHz)	(H/V)
	(kHz)
IBM, 640 x 350	31.469	70.086	25.175	+/-
IBM, 640 x 480	31.469	59.940	25.175	-/-
IBM, 720 x 400	31.469	70.087	28.322	-/+
MAC, 640 x 480	35.000	66.667	30.240	-/-
MAC, 832 x 624	49.726	74.551	57.284	-/-
MAC, 1152 x 870	68.681	75.062	100.000	-/-