Samsung PH50KLPLBF/XY, PH50KPPLBF/XY, PH50KPPLBF/SM manual Signal Balance, Signal Control, Gain

Adjusting the PDP Display

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

(Available in PC mode only)

Note

The direct button on the remote control is the 'AUTO' button.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.

MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Bal- ance]

(Available in PC mode only)

Signal Balance

MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Bal- ance] → ENTER → [Signal Balance] → , → ENTER

Selects either On or Off with the signal control.

Signal Control

MENU → → ENTER → [Picture] → → → → →→ → ENTER → [Signal Bal- ance] → → ENTER → [Signal Control]

1.R-Gain

MENU → → ENTER → [Picture] → → → → →→ → ENTER → [Signal Balance] → → ENTER → [Signal Control] → ENTER → [R-Gain] → , → ENTER

2.G-Gain

MENU → → ENTER → [Picture] → → → → →→ → ENTER → [Signal Balance] → → ENTER → [Signal Control] → → ENTER → [G-Gain] → , →

ENTER

3.B-Gain