Samsung PH50KPPLBF/XY manual Connections, Connecting a Computer Using a Power cord with Earth

Connections

Connecting a Computer

Using a Power cord with Earth

•In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance.

Note

AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the PDP Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your PDP Display.

Connect the power cord for your PDP Display to the power port on the back of the PDP Display. Turn on the power switch.

There are 3 ways to connect the D-sub to your PDP Display. Choose one of the following:

Using the D-sub (Analog) connector on the video card.

•Connect the D-sub to the 15-pin, RGB port on the back of your PDP Display and the 15 pin D-sub Port on the computer.

Using the DVI (Digital) connector on the video card.

•Connect the DVI Cable to the DVI port on the back of your PDP Display and the DVI port on the computer.

Using the BNC (Analog) connector on the video card.