Samsung PH50KLPLBF/XY, PH50KPPLBF/XY manual Connecting to a Camcorder, Connecting a DVD Player

Connections

Connecting to a Camcorder

1.Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [L-AUDIO-R] on the PDP Display.

2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the PDP Display.

3.Select AV for the Camcorder connection using the Source button on the front of the PDP Display or on the remote control.

4.Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting a DVD Player

1.Connect a set of audio cables between the AV/COMPONENT AUDIO IN [L-AUDIO-R] on the PDP Display and the AUDIO OUT jacks on the DVD player.

2.Connect a Component cable between the BNC / COMPONENT IN - PR, Y, PB port on the PDP Display and the PR, Y, PB jacks on the DVD player.