Troubleshooting
Troubleshooting
Problem |
| Action | |
|
| ||
| • Make sure the washing machine is set on a level floor. If the | ||
|
| floor is not level, use the levelling feet to adjust the washing | |
|
| machine. | |
| • Make sure the washing machine is not contacting any other | ||
|
| object. | |
Vibrates excessively | • Make sure the laundry load is balanced. | ||
• | Make sure the laundry is spread evenly in the washing | ||
or makes noise. | |||
| machine. Spread out the laundry evenly and start again. | ||
|
| ||
| • Make sure the space around the washing machine is free of | ||
|
| objects. | |
| • Humming is produced normally during operation. | ||
| • Objects such as coins can cause noise. Remove these objects | ||
|
| from the washing machine after washing is complete. | |
|
| ||
| • Plug the power cord into a live electrical outlet. | ||
| • Check the fuse or reset the circuit breaker. | ||
| • Close the door, and press or tap Start/Pause to start the | ||
|
| washing machine. For your safety, the washing machine will | |
|
| not spin unless the door is closed. | |
| • | Before the washing machine starts to fill, it will make a series | |
Stops. |
| of clicking noises to check the door lock and does a quick | |
| drain. | ||
|
| ||
| • There may be a pause or soak period in the cycle. Wait briefly | ||
|
| and the washing machine may start. | |
| • Make sure the inlet hose screens at the taps are not clogged. | ||
|
| Periodically clean the screens. | |
| • This problem occurs temporarily due to low voltages, and will | ||
|
| be solved when power recovers. | |
|
|
| |
The Eco Tub Clean | • | When the machine is diagnosed to be cleaned, the indicator | |
| blinks for an hour. This recurs 6 consecutive times until you | ||
alarm does not turn |
| run the Eco Tub Clean cycle. This is normal, and not a system | |
off. |
| failure. To keep the tub clean, it is recommended to run the | |
|
| cycle once every | |
|
|
| |
36 English