Samsung WW90K6410QW/SV, WW10K6410QX/SV manual Operations, Control panel

Operations

Control panel

10

02

08

11

09

03 04 05 06 07

01	Cycle Selector	Turn the dial to select a cycle.
02	Display	The display shows current cycle information and estimated time
		remaining, or an information code when a problem occurs.
03	Temp.	Press to change the water temperature for the current cycle.
04	Rinse	Press to change the rinse count for the current cycle. You can set the
		rinse count to a max of 5, depending on the cycle.
		Press to change the spinning speed for the current cycle.
		•	Rinse Hold ( ): The final rinse process is suspended so that the
			laundry remains in the water. To unload the laundry, run a drain or
			spin process.
05	Spin	•	No Spin : The drum does not spin after the final drain process.
		•	Spin Only : To run the Spin Only cycle, press Spin for 3 seconds.
			When the cycle time and spinning speed appear, press Spin
			repeatedly until a desired spinning speed is selected. Then, press
			Start/Pause to start the cycle. The spinning time depends on the
			selected cycle.
		Press to select an option from Intensive and Pre Wash.
06	Options	Press again to deselect.
		• Availability of the options depends on the cycle.
07	Bubble Soak	Press to activate/deactivate the Bubble Soak function. This function
		helps remove a wide variety of stubborn stains.
		Delay End lets you set the end time of the current cycle. Based
		on your settings, the start time of the cycle will be determined by
08	Delay End	the machine’s internal logic. For example, this setting is useful for
		programming your machine to finish a wash at the time you normally
		return home from work.
		• Press to choose a preset unit of hours.

Operations

English  29

WW10K6410QW_DC68-03676D-02_EN.indd 29

2016/5/31 12:08:05