Samsung WA12V5JEC/XSV manual Wool program, Memory program, Easy program

Page 12

setting up your washer

Wool program

Use this program to wash delicate clothing items such as washable sweaters, cardigans, and other wool items.

1.Press the Power button to turn the washer “On”.

2.Press the Program select button.

3.Press the Start/Pause button. The water level is automatically selected at the mid-level between Mid-low and Extra low. You can also adjust the water level manually.

4.The wash, rinse, and spin cycles follow.

5.To pause a program, press the Start/Pause button again. You can change the program when it is paused.

6.Close the lid.

You can select only Cold water.

The last spin cycle is a light cycle to prevent wrinkles.

Use only detergent indicated by the laundry.

Refer to the Care Label on the clothing for the appropriate wash information.

Make sure buttons are fastened and that clothing is turned inside out.

In the Wool program, Air Turbo and Silver Wash functions cannot be selected as it may damage delicate items.

Memory program

Use this program to create your very own favorite or frequently used programs and store them in the washer so that you can select them at any time.

1.Press the Power button to turn the washer “On”.

2.Press the Program select button.

3.Select your frequently used functions.

Select Wash, Rinse, Spin or Silver Wash according to your requirements.

4.Press the Start/Pause button to store them.

Only stored when the Wash + Rinse + Spin steps are selected.

5.Add detergent and softener according to the water level and close the lid.

If you select the Memory program after turning the washer “On”, the stored settings are automatically retrieved.

To change the stored settings, select the Memory program, reconfigure the settings and then press the Start/Pause button. Then, the changes are stored.

Easy program

If you choose EASY, you will enjoy full access to all of Samsung Washing Machine’s userfriendly functions at your fingertips. When selecting this program, Air Turbo, Silver wash and Mist Shower are selected automatically.

1.Press the Power button to “On”.

2.Press the Program select button four times.

3.Press the Start/Pause button. Water level is selected automatically. Washing rinsing, and spinning follow. If you want to pause, press the Start/Pause button again. You can change the Program when paused.

4.Close the lid.

12_setting up your washer

WA12VP-02597C_EN.indd 12

2008-04-15 ¿ÀÀü 11:25:46

Image 12
Contents Washing Machine Features Safety instructions 4safety instructions Contents Setting up your washer Description of PartChecking Before Washing and Caring for Garments Not washable laundryAbout Detergent Shake the dirt or soils from clothes Turn inside out for those nappy clothes before washingHOW to Wash Automatically Depends on the Laundry Washing for the first timeSpecial notes Control Panel Fuzzy program Blanket programWool program Memory programEasy program Super Clean Delay StartQuick program ECO+ programSilver Wash Air TurboManual functions Installation & maintenance EnvironmentLevelling Connecting the Water Supply Hose HOW to Connect the Drain Hose Case of PUMP-DRAINED WasherHOW to PUT the Detergent HOW to ADD the Fabric SoftenerWater Supply Connector Filter Assembling the RAT Protection PanelCleaning the Filter Clean the Pump FilterTroubleshooting Problem CheckProblem Check & Solution Washing machine won’t work?Specification Questions or COMMENTS?