Samsung WA12V5JEC/XSV HOW to Wash Automatically Depends on the Laundry, Washing for the first time

Page 9

HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY

Before starting washing, check the following;

Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.

Washing for the first time

Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:

1.Press the Power button.

2.Open the detergent drawer and insert a little detergent.

3.Turn on the water supply to the washing machine.

4.Press the Start/Pause button.

This will remove any water from the manufacturer’s test run remaining in the machine.

Special notes!

Automatic Sensing Function

At every program (except wool program) the amount of laundry is automatically sensed and then appropriate water level, washing time, rinsing cycle, and spinning time are automatically selected for automatic washing.

After the power is on, a program is selected and Start/Pause button is pressed. Then, the washing board starts spinning without water. This action senses how much laundry is in the washing basket, not a machine problem. After this sensing process, water supplies automatically.

Adding Detergent and Softener

It senses the amount of laundry and indicates the water level and amount of detergent. Then, it starts water supply right away.

During the water supply, it is possible to open the detergent box and add detergent. However, it is better to press Start/Pause button to stop water supply and add detergent. Close the lid and press Start/Pause button again. This way is much more convenient.

If the softener is inserted in the softener dispenser, it automatically adds in at the last rinsing cycle.

Put the laundry into the washer and add detergent, too.

Be careful not to overload. Use right detergent for the fabrics you are washing.

If the lid is open while running, the washing machine is stopped automatically for safety. (Except, water supply continues while the lid is open.)

When hot water is selected, both cold and hot water are supplied for the first 20 seconds in order to protect the clothes.

Possible to control the washing time, rinsing cycle, and spinning time at every program during the washing.

01 SETTING UP YOUR WASHER

setting up your washer_9

WA12VP-02597C_EN.indd 9

2008-04-15 ¿ÀÀü 11:25:45

Image 9
Contents Washing Machine Features Safety instructions 4safety instructions Contents Description of Part Setting up your washerChecking Before Washing and Caring for Garments Not washable laundryAbout Detergent Turn inside out for those nappy clothes before washing Shake the dirt or soils from clothesHOW to Wash Automatically Depends on the Laundry Washing for the first timeSpecial notes Control Panel Blanket program Fuzzy programWool program Memory programEasy program Delay Start Super CleanQuick program ECO+ programAir Turbo Silver WashManual functions Installation & maintenance EnvironmentLevelling Connecting the Water Supply Hose Case of PUMP-DRAINED Washer HOW to Connect the Drain HoseHOW to ADD the Fabric Softener HOW to PUT the DetergentWater Supply Connector Filter Assembling the RAT Protection PanelClean the Pump Filter Cleaning the FilterProblem Check TroubleshootingWashing machine won’t work? Problem Check & SolutionSpecification Questions or COMMENTS?