Quick program
The Quick program is good for light or slightly stained laundry.
1.Press the Power button to turn the washer “On”.
2.Press the Program select button.
3.Press the Start/Pause button. The water level is selected automatically.
4.The wash, rinse, and spin cycles follow.
5.To pause a program, press the Start/Pause button again. You can change the program when it is paused.
6.Close the lid.
Super Clean
Use this program to achieve the cleanest wash.
This program provides you with the optimum in washing performance through the
1.Press the Power button to turn the washer “On”.
2.Press the Program select button.
3.Press the Start/Pause button. The water level is selected at the
The water level is selected between Maximum and Mid or at the
4.Close the lid.
ECO+ program
If you want to wash those frequently used towels or less dirty laundry time. Because washing is speedy, it is good for light or less stained laundry.
1.Press the Power button to turn the washer “On”.
2.Press the Program select button.
3.Press the Start/Pause button.
4.The wash, rinse, and spin cycles follow.
5.To pause a program, press the Start/Pause button again. You can change the program when it is paused.
6.Close the lid.
Delay Start
Use this to specify a time for the wash cycle to start, for example, when you need to go out and are unable to monitor the washer.
1.Press the Power button to turn the washer “On”.
2.Press the Delay Start button once.
You may set the delay end time using the Delay Start button from between 3 to 18 hours.
3.Press the Start/Pause button and add the appropriate amount of detergent into the detergent drawer.
4.Close the lid.
The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
•Detergent must be added into the detergent drawer.
•If detergent is added onto the laundry directly, some clothes may become discolored because the start has been delayed.
•To cancel a Delay Start, press the Power button.
setting up your washer_13
01 SETTING UP YOUR WASHER
