Samsung MAXDS730TH/ESN Connecting your System to the Power Supply, Connecting the Loudspeakers

Page 7

Where to Install Your

Mini-Compact System

To take full advantage of your new mini-compact system, fol- low these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage setting (OPTIONAL). If the voltage of the socket does not correspond to the setting on the rear of the unit, you may seriously damage your system.

1

Check the position of the voltage selector on the rear of the system

 

(OPTIONAL).

2

Plug the main lead (marked AC Cord on the rear of the system) into

 

an appropriate socket.

3

Press the On/Standby button to switch your mini-compact system on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting the Loudspeakers

GB

The loudspeaker and subwoofer connector terminals are located on the rear of the system.

The subwoofer generates low-pitched tones.

(Ex. Explosion, the sound of spacecraft flying, the sound of pondering, etc.)

1 Press and hold the clamp of the speaker terminal on the rear of the unit.

2 Insert the end of the speaker cord into the terminal.

Match the polarity (colors): Red (+) to red (+) and black (–) to black (–).

Match the polarity (colors): Blue (+) to blue (+) and black (–) to black (–); Red (+) to red (+) and black (–) to black (–).

3 Release the finger from the clamp.

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

Speaker Cord

(Red/Black)

Speaker Cord

(Blue/Black)

Match the polarity (colors): Blue (+) to blue (+) and black (–) to black (–); Red (+) to red (+) and black (–) to black (–).

Directions in Installing Speaker

Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.

Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.

Do not take the speaker apart from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display.

7

Image 7
Contents THREE-CD Changer Safety Warnings Contents 3433 1415 Front Panel ViewSpeaker output volume control Remote ControlRear Panel View Directions in Installing Speaker Connecting your System to the Power SupplyConnecting the Loudspeakers Where to Install Your Mini-Compact SystemVideo Composite video Supplied Connection of the TV monitor and VCR optionalConnection of the subwoofer optional Audio cordDVD/CD Digital Out Jack Connecting to an amplifier with Dolby Pro Logic supportConnection for better sound Insert Remote BatteriesConnecting the FM Aerial Connecting the AM MW AerialConnecting the SW Aerial Option Demo/Dimmer function Setting the ClockDVD Playback Using the On-Screen DisplayPlaying a Disc Selecting a Disc in the CD changerTo move directly to a title, chapter, or time Forward/Reverse SearchingHigh-Speed Playback Skipping through a ChapterSlow Playback/Checking Remaining Time Repeat PlaybackTo Select the Disc Menu Using Disc Menu/TitleUsing the Title Menu Program PlaybackSelecting the Audio Language Program Playback Cont’dSelecting the Audio Language/Subtitle Language To Change the ProgramMP3 Playback Various DVD FunctionsCD-R/RW playback compatibility Operations Using the On-Screen DisplayMP3 Playback Cont’d MP3 File CompatibilityRepeating Playback System SetupTo Set up the System Press the Setup button againRating Level System Setup Cont’dWhen the rating level password has been forgotten TV Screentv Screen RatioSearching for and Storing the Radio Stations Setting up the Language FeaturesTo set up the language feature To End the Language Features SetupYou can listen to a stored radio station as follows Tuner modeSelecting a Stored Station Improving Radio ReceptionListening to a Cassette CD Synchro Record FeatureRecording a Compact Disc Tape Counter Selecting the Cassette Playback Mode Deck 2 onlyRecording a Radio Program Copying a Cassette DubbingPress Timer On Timer FunctionCancelling the Timer To set the timer functionMute Function Selecting a Sound ModePower Surround Function 3D Sound FunctionMicrophone Functionoption Connecting HeadphonesSetting the System to Switch off Automatically Subwoofer Level FunctionConnect Connecting to an External Source Safety PrecautionsPrecautions When Using Compact Discs Cleaning Your Mini-Compact SystemPrecautions When Using Audio Cassettes Before Contacting the After-Sales Service10 dB 0.5 % Technical SpecificationsReference Searched quickly using these numbersAH68-01237B