Genie M-4500, M-4700 Install Light Bulbs and Lenses, Antenna Wire Installation 40MHZ

8-13. INSTALL LIGHT BULBS AND LENSES

DO NOT use a bulb with a rating higher than

60 Watts (W), or larger than a Standard size bulb.

A stronger or larger bulb may result in

fire or damage to the opener.

■Install a maximum 60 W bulb (not provided) into lamp socket(s).

■Install lamp lens(es). Two lenses for a M-4700 model, one lens for a M-4500 model.

■Line up lamp lens tabs with slots in housing and snap securely into place. Repeat same procedure with second lamp lens on the opposite side, if you have an M-4700 power head.

■Line up lamp lens tabs with corresponding slots in chassis. Snap lens onto chassis for M-4500 model.

■To remove lamp lens, pull lamp lens to unsnap from housing and chassis.

Fig. 33

M-4700

Lamp Lens

Lamp Lens Tabs

Chassis Slots

	Housing Slots
Install Bulbs	Snap lamp lens tabs	Hinge lamp lens downward,
	into slots in chassis	line up tabs with slots in
		housing, and snap into place.

M-4500

Lamp Lens

Lamp Lens Tabs

Chassis Slots

	Housing Slots
Install Bulb	Snap lamp lens tabs	Hinge lamp lens downward
	into slots in chassis	line up tabs with slots in
		housing, and snap into place.

8-14. ANTENNA WIRE INSTALLATION (40MHZ)

Uncoil the gray antenna wire and position per diagram. Fig. 34.

IMPORTANT NOTE:

■Do not lengthen or shorten the antenna wire.

■Make sure the antenna wire is directed away from system power cord and any other power sources.

■Avoid fastening the antenna wire directly to any metal surfaces. If stapling to joists or drywall, make sure staples do not damage antenna wire.

Fig. 34

Ceiling

Antenna wire

Powerhead

16