Samsung DVD-VR325/EUR, DVD-VR325/XEG manual Auto Setup, Continue, Menu to exit. is displayed

Auto Setup

You do not need to preset the stations if you have already set them automatically (See Plug & Auto Setup on page 23).

Your DVD Recorder & VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

•Plug & Auto Setup (See page 23)

•Auto Setup

•Manual Setup (See pages 26~27)

1	With the unit in Stop mode/No Disc mode, press
	the MENU	button.
2	Press the …† buttons to select Setup						, then press
	the OK or √ button.
		No Disc				Setup
		Programme		System		√
				Clock Set
		Setup				√
				Install		√
				Language		√
				Audio		√
				Video		√
				Parental Control		√
		MOVE	OK		RETURN	EXIT
3	Press the …† buttons to select Install						, then press
	the OK or √ button.
		No Disc				Install
		Programme		Auto Setup		√
				Manual Setup		√
		Setup
				TV System	: G	√
				VIDEO Output CH	: Ch 36	√
		MOVE	OK		RETURN	EXIT

4	Press the …† buttons to select your “Country”, then
	press the OK			button.
	The message “Your data will be lost. Press [OK] to
	continue, [MENU] to exit.” is displayed.
		No Disc				Auto Setup
		Programme		Auto Setup			√
							√
				Your data will be lost.
			Press [OK] to continue, [MENU] to exit.
		MOVE		OK	RETURN	EXIT
5	Press the OK			button to start the auto scanning.

•The DVD Recorder searches for the stations according to a preset preference list correspond- ing to the country that you have selected.

		No Disc				Auto Setup
		Programme
			Setup	Please wait
				Scanning...	50%
					Stop
		MOVE		OK	RETURN EXIT
	• The first frequency band is scanned and the first
	station found is displayed and stored.
	And the DVD Recorder & VCR searches for the
	second station and so on.
	• When the automatic scanning procedure has
	finished, the DVD Recorder & VCR switches
	automatically to programme 1.
	• The number of stations automatically stored by
	the DVD Recorder & VCR depends on the
	number of stations that it has found.
6	If you wish to cancel the auto scanning before the
	end, press the OK				button.

• The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically.

System Setup

English - 25