![](/images/new-backgrounds/1274539/27453925x1.webp)
4AV IN [VIDEO] / [L-AUDIO-R]
Video and audio inputs for external devices, such as a camcorder or VCR.
■When connecting, use the appropriate connector.
5COMPONENT IN
Connects Component video / audio.
■When connecting, use the appropriate connector.
6PC IN
Connects to the video output jacks on your PC.
■If your PC supports an HDMI connection, you can connect this to the HDMI IN 1(DVI), 2, 3 or 4 terminal.
■If your PC supports a DVI connection, you can connect this to the HDMI IN 1(DVI) / PC/DVI AUDIO IN terminal.
7PC/DVI AUDIO IN
Connect to the audio output jack on your PC. DVI audio outputs for external devices.
8HDMI IN 1(DVI), 2, 3, 4
Connects to the HDMI jack of a device with an HDMI output.
■No sound connection is needed for an HDMI to HDMI connection.
■What is HDMI?
The difference between HDMI and DVI is that the HDMI device is smaller than DVI’s one.
■The TV may not output sound and pictures may be displayed with abnormal colour when DVD /
/Satellite receiver
■Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or
■HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
9USB1
Connector for software upgrades and Media Play, etc.
0DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theatre receiver.
■When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control.
■5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
■When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD /
!COMMON INTERFACE Slot
■Insert CI (Common Interface) card into the slot.
■When not inserting ‘CI(CI+) CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
■The pairing information containing a telephone number, ‘CI(CI+) CARD’ ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
■When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that the channel list is now updated.
You must obtain a ‘CI(CI+) CARD’ from a local cable service provider. Remove the ‘CI(CI+) CARD’ by carefully pulling it out with your hands since dropping the ‘CI(CI+) CARD’ may cause damage to it.
Insert the ‘CI(CI+) CARD’ in the direction marked on it.
The place of the COMMON INTERFACE Slot may be different depending on its model.
‘‘CI(CI+) CARD’ is not supported in some countries, regions, broadcasting stations check with your authorized dealer.
The CI+ function is only applicable to LE********P model.
If you have some problems, please contact to service provider.
@
Connector for service only.
13