Samsung DVD-R100E/EUR manual Clock Set, Menu button, With the unit in Stop mode, press

Clock Set

This menu is used to set the current time.

You need to set the time to use timer recording.

1	With the unit in Stop mode, press the
	MENU button.

2 Using the †… buttons, move the selection bar to “Setup” then press OK button to select.

DVD-RAM(VR)			Setup
	System		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	OK	RETURN	EXIT

3 Select “System” the †… buttons, then press the √ or OK button.

DVD-RAM(VR)			System
	System		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	OK	RETURN	EXIT

4 Select “Clock Set” using the †… buttons, then press the √ or OK button.

DVD-RAM(VR)			System
	Clock Set		√
	Install		√
	CM Skip Time	: 15 Sec	√
	AV1 Output	: Video	√
	NICAM	: On	√
MOVE	OK	RETURN	EXIT

5 Use navigation †…œ √ buttons to input

Time, Date,Year. Use number button to input clock data directly.

Set Auto clock tap “On” or “Off” using
6 the …† buttons.
	DVD-RAM(VR)			Clock Set
	Time	Date	Year
	12 : 00	01	JAN 2004	THU
	Auto Clock :		Off
	MOVE OK		RETURN	EXIT

7 Press OK button, then the date and time will be saved.

If you don’t press OK button, it will not be saved.

■ You must have the antenna connected to set the Auto Clock.

NOTE See page 15 Connections.

■Auto Clock : The recorder sets the clock automatically by searching for a channel that carries a time signal.

System Setup

English -25