Samsung DVD-R100E/EUR manual Setting Up the Audio Options, Audio setup menu will be displayed

Setting Up the Audio

Options

Allow you to setup the Audio device and sound status depending on the audio system in use.

1	With the unit in Stop mode, press the
	MENU button on the remote.

2 Select “Setup” using †… buttons, then press the √ or OK button.

3 Select “Audio” using †… buttons, then press the √ or OK button.

Audio setup menu will be displayed.

DVD-RAM(VR)			Setup
	System		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	OK	RETURN	EXIT

4 Use †… buttons to select the desired sub menu and press the OK or √ button.

DVD-RAM(VR)		Audio
Digital Output	PCM
DTS	Bitstream
Dynamic Compression	: On	√

MOVE OK RETURN EXIT

5 Use the †… buttons to select the desired item. Then press the √ or OK button.

	■	Press the RETURN or œ button to return
		to the previous menu. Press the MENU
NOTE
		button to exit the menu.

Audio Options

Digital Output

1.PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo.

2.Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

	■ Digital output setting is equally applied to
	both Dolby Digital and MPEG-2 audio.
NOTE
	LPCM sound track is always outputted as
	PCM. It has no relation with Digital Output
	setting.

■Be sure to select the correct Digital Output or you will hear no sound or loud noise.

DTS

1. Off : Doesn’t output DTS signal.

Select this when your AV receiver or AV amplifier does not have DTS decoder.

2.On : Outputs DTS Bitstream via digital output when you play DTS track.

Select this only when your AV receiver (or AV amplifier) have DTS decoder.

■ When DTS soundtrack is played, sound

NOTE	does not output from Analogue Audio
	Output.

Dynamic Compression

Dynamic Range Compression : This is only active when a Dolby Digital signal is detected.

-On : When the Movie-soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

-Off : You can enjoy the movie with standard Dynamic Range.

System Setup

English -31