Auto fast Preheating the Oven |
| Cooking by Convection |
For convection cooking, it is recommended that you preheat the oven to the appropriate temperature before placing the food in the oven. When the oven reaches the requested temperature, it is maintained for approximately 10 minutes; it is then switched off automatically. Check that the heating element is in the correct position for the type of cooking that you require.
1.Press the Auto Fast Preheat(
) button.
Next : Press the blinking button.
2.Press the Select ( 
) button one or more times to set the temperature.
Result: The following indications are displayed: 250°C(temperature)
Next : Press the blinking button.
3.Press the Start( 
) button.
Result: The oven is preheated to the requested temperature.
◆Upon arrival at the preset temperature, the oven beeps 6 times and the temperature is kept for 10 minutes.
◆After 10 minutes, the beeps 4 times and the operation stops.
✉In case the inner temperature has reached the preset temperature, the beep 6 times when setting the temperature and the preset temperature is kept for 10 minutes.
✉If you would like to know the current temperature of oven cavity, press
Auto Fast Preheat(
) button.
The convection mode enables you to cook food in the same way as in a EN traditional oven. The microwave mode is not used. You can set the temperature, as required, in a range varying from 40°C to 250°C in eight preset levels. The maximum cooking time is 60 minutes.
☛If you wish to Auto Fast Preheat the oven.
•Always use oven gloves when touching the recipients in the oven, as they will be very hot.
•You can get better cooking and browning, if you use the low rack.
Check that the heating element is in the horizontal position and that the turntable is in position. Open the door and place the recipient on the low rack and set on turntable.
1.Press the Convection ( 
) button. Next : Press the blinking button.
2.Press the Select( 
) button once or more times to set the temperature.
Result: The following indications are displayed:
(convection mode) 250°C (temperature)
Next : Turn the blinking dial.
3.Set the cooking time by turning the Jog Dial.
Next : Press the blinking button.
4.Press the Start( 
) button.
Result: Cooking starts:
◆When cooking has finished, the oven will beep and flash “0” four times. The oven will then beep one time per minute.
✉You can check the temperature at any time by pressing the Auto Fast
Preheat( 
) button.
15