Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
8To Enter Programming Level 3 (for the Technician):
With no cook timers running, displays will show one of the following displays:
Press be
, | , or |
The left display will show
.
. The right display will
Enter password
Level 3 Password |
| ||
| | | |
using the product keys as a numeric keypad for entry.
Display will show 
. Product key indicators will illuminate
to prompt operator to select a key. This section details parameters that may be changed in Level 3 programming.
8.1Offset the Temperature Display:
This adjustment allows the displayed temperature value to be offset to reflect the true center vat temperature while reading the probe tip temperature. Default value is zero. With zero value set, displayed values are the probe temperature.
With display showing | press product key 1. |
Display shows [OFF nn F] [DEGREES], where “nn” is the value of the adjustment.
Negative values are preceded with a minus sign.
To change this value, use the product keys for numeric entry of a new value.
|
Press
Use the product
selection, press
8.2Melt Cycle ON Time:
Display will show [POSITIVE] [DEGREES].
choices (Positive or Negative value). After
Display returns to | . |
With display showing | press product key 2. |
Display shows [MLTON :nn] [MELT ON], where “nn” is the value, in seconds, of time for a melt cycle heat pulse.
To change this value, use the product keys for numeric entry of a new value.
Press | Display returns to | . |
|
8.3Minimum ON and OFF Cycle Time:
With display showing | press product key 3. |
Display shows [MIN ON:nn] [MIN ON], where “nn” is the value, in seconds, of time for minimum heat pulse period.
To change this value, use the product keys for numeric entry of a new value, then press
|
seconds,
value.Press
Display shows [MIN OFF:nn] [MIN OFF], where “nn” is the value, in
heat off period. Use the product keys for numeric entry of a new
Display now shows | . |
Page 23 of 44 |
