Manuals / Pitco Frialator / Kitchen Appliance / Ventilation Hood

Pitco Frialator 60149517 manual Shake Time, Hold Time, Hold Pre-Alarm, To Exit Level 1 programming

Models: 60149517 60149518

1 44

Download 44 pages 11.83 Kb

Page 19

6.2.2Shake Time:

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

6.2.2Shake Time:

Shake time is an alarm that sounds during Cook Time to prompt operators to shake the basket. Default for this value is zero, meaning the Shake Time is inactive. To use Shake Time, the time value must be a non-zero value, and, must be set to a value less than cook time.

Display shows [SHn mm:ss] where “n” is the key number, “SH” means Shake, and “mm:ss” is time in minutes and seconds.

 Use the product keys for numeric entry to adjust the current

save shake time and continue setup for this product key.

Note: The value entered for shake time is the time from the end of the cook.

6.2.3Hold Time:

Cooked product may stand in holding bins for a period of time. This timer produces an alarm to inform operators to discard old product and start a new cook. Default for this value is zero, meaning the Hold Time is inactive.

Display is showing [HDn mm:ss], where “n” is the key number, “HD” means HOLD, and “mm:ss” is minutes and seconds.

 Use the product keys for numeric entry to adjust the current

save hold time and continue setup for this product key.

6.2.4Hold Pre-Alarm:

Hold Pre-Alarm is a timer setting that is used to warn operators that the Hold Time is about to expire. To use Hold Pre-Alarm, the time value must be a non-zero value, and, must be set to a value less than Hold Time. Default value is zero, meaning the Hold Pre-Alarm is inactive.

Display is showing [PAn mm:ss] where “n” is the key number, “PA” means Pre-Alarm, and

“mm:ss” is minutes and seconds.

 Use the product keys for numeric entry to adjust the current s

save pre-alarm time.

Note: Value entered for hold pre-alarm time is the time from the end of the hold period.

Display will again return to

2.2.2 to make changes to any other product keys or continue.

. Repeat steps from section

6.3To Exit Level 1 programming:

Display shows

Display shows

or,

.

.

. Continue to section 3 “To Change Options”,

To exit Level 1 programming,

Displays will show running.

,

.

, or

, when no active cooks are

Page 19 of 44

L22-378 Rev 3

Image 19

Pitco Frialator 60149517, 60149518 manual Shake Time, Hold Time, Hold Pre-Alarm, To Exit Level 1 programming

Contents

English for Pitco P/N’s 60149517 Full Vat and 60149518 Split VatService Manual I12+ Cooking Computer for ROV FryersFahrenheit or Celsius Display 9 To Enter Factory Menu Level 4 for the Technician 8 To Enter Programming Level 3 for the TechnicianTo Enter Filter Settings Menu Level 5 for the Store Manager Other Displays Mechanical DimensionsElectrical Connections at LEFT and RIGHT connectors Probe Resistance Chart1.1 To turn the appliance ON 1 Key Locations and Functions1.2 To turn the appliance OFF of the Cook . Default value is 0000, or inactive 1.4 To cancel a cook1.5 To check Actual and Set temperatures 1.3 To start a cookthe Celsius scale, press 1, 0, 0 keys to manually enter boil 1.7 Perform a Boil Out operation1.7.1 Automatic Boil Entry Water Detection 1.7.2 Manual Boil Entry2.2 Manual Filtering 2 Oil Handling and Fryer Operations 2.1 Fresh Oil Top-Off2.2.1 Filter Control Option Acknowledge Check List 2.2.2 FDF Triggering Option2.3 Automated Filtering Option Initiate Check List2.3.2 Automatic Polishing 2.3.1 Automatic Filtering2.3.4 Blocked Drain 2.3.3 Automatic Disposal2.4 Advanced Fryer Operations For Automated Filtering Option 2.4.2 Full Vat/Left Drain Valve 2.4.1 Full Vat/Left Return Pump2.4.4 Right Return Pump Split Vat Only 2.4.3 Full Vat/Left Manual Top-Off2.4.5 Right Drain Valve Split Vat Only 3.2 Filter Now 2.4.6 Right Manual Top-Off Split Vat Only3 Control Filter Lockout CFL 3.1 Filter Soon4 Fresh Oil Supply Monitoring 4.2 JIB Check/Error4.1 JIB Oil Remaining 5.1.2 Data Viewing using the product keys as a numeric keypad for5 Filter Data Function FDF Data Logging 5.1.1 Data LoggingPage 6 To Enter Programming Level 1 for the Store Manager 6.1 To Set Cook Temperature6.2.1 Cook Time 6.3 To Exit Level 1 programming 6.2.4 Hold Pre-Alarm6.2.2 Shake Time 6.2.3 Hold Time7 To Change Options Level 2 for the Store Manager 7.2 Password Change or Required7.1 Fahrenheit or Celsius Display 7.4 Language Selection 7.3 Beeper Volume and Tone7.5 Melt Cycle Type 7.7 Control or Timer Left side of Dual or Single Vat 7.6 Recovery Test Value7.8 Control or Timer Right side of Dual Vat 8.3 Minimum ON and OFF Cycle Time 8.1 Offset the Temperature Display8 To Enter Programming Level 3 for the Technician 8.2 Melt Cycle ON TimeRecovery Times Function 8.5 Diagnostic Menu Entry8.5.1 Exit Diagnostic Menu 8.6 Ready Level8.8.2 Cook Now 8.7 Temperature Operating Range8.8 More Service Menu Entry 8.8.1 Instant On Toggle8.8.7 Configuration Value 8.8.4 Shake Alarm Duration8.8.5 Hold Alarm Duration 8.8.6 Cancel Duration8.8.10 Flex Time Toggle 8.8.8 Factory Reset8.8.11 Exit More Service sub menu 8.8.9 Standing Pilot ToggleBASKET n Setting8.9 Number of Basket Lifts Full Vat Fryer9 To Enter Factory Menu Level 4 for the Technician Offset Temperature Display9.5 Recovery Test Values Diagnostic Menu Entry9.10 Number of Basket Lift Operating Temperature Range9.7 Ready Level 9.9 High Limit Value10.1 Drain Time 10 To Enter Filter Settings Menu Level 5 for the Store Manager10.2 Filter Time 10.3 Polish Time 10.5 Filter Temperature10.4 Fill Time 10.6 Cook Counts Allowed 10.8 Oil Level Probe/Auto Top-Off Enable10.7 Cook Counts Deferred 10.11 More Filter Menu Entry 10.10 Filter Data Function Enable10.11.1 JIB Monitor Oil Remaining Enable 10.9 Auto Top-Off Time10.11.3 Low JIB Time 10.11.4 JIB Monitor Check/Fault Enable10.11.5 Filter Return Key Enable 10.11.2 Maximum JIB Time10.11.7 To Exit More Filter Menu 10.11.6 On-Demand Top-Off Key Enable10.12 To Exit Programming Level 11 Other Displays L22-378 Rev 12 Mechanical DimensionsSolstice I12+ Cooking Computer for ROV Fryers Pitco P/N Page 39 ofType 13 Electrical Connections at LEFT and RIGHT connectorsJ1Left InputsResistance 14 Probe Resistance ChartProbe Resistance in 5F Increments ProbeL22-378 Rev Solstice I12+ Cooking Computer for ROV Fryers Pitco P/NPage 42 of Page 43 of Solstice I12+ Cooking Computer for ROV Fryers Pitco P/NL22-378 Rev L22-378 Rev Solstice I12+ Cooking Computer for ROV Fryers Pitco P/NPage 44 of