Solstice I12+ Cooking Computer for ROV Fryers Pitco P/N 60149517 & 60149518
8.8.3Heat Demand Profile:
With display showing
, press product key 3. Display will show
[xxxxxxx] [HEAT DEM], where xxxxxxx may be one of 5 heat control profiles listed below.
1.[GENERIC 1] for gas fired fryer appliance.
2.[GENERIC 2] for electric fryer appliances, and model SGH50.
3.
4.[ROV1] for use with SSHLV type models only.
5.[ROV2] for use with SELV models only. This is the factory default.
Use product key [0] change value, then press
.
8.8.4Shake Alarm Duration:
choice Display returns to
With display showing
, press product key 4. Display will show
product keys for numeric entry of desired value, then press
returns to | . |
will sound. Use
ve choice. Display
8.8.5Hold Alarm Duration:
With the display showing
, press product key 5. Display will
show
Use product keys for numeric entry of desired value, then press
Display returns to | . |
8.8.6Cancel Duration:
will sound.
choice.
With the display showing
, press product key 6. Display will
show [CANCEL:nn] [DELAY] , where “nn” is the time in seconds the operators must press a cancel a cook. Use product keys for numeric entry of desired value, then press
choice. Display returns to
. Default value is
8.8.7Configuration Value:
With display showing
, press product key 7. Display will show
[CFG hhhh], where “hhhh” is a hexadecimal checksum of the configuration memory contained
in the controller. | any part of the setup of this control will change the check |
sum value. Press
will return to
.
Page 27 of 44 |