Pitco Frialator 60149518, 60149517 manual Automatic Filtering, Automatic Polishing

Solstice I12+ Cooking Computer for ROV Fryers

Pitco P/N 60149517 & 60149518

oIf there is still oil in the filter pan, press the NO key to run the pump for 20 additional seconds. “Is vat full?” will be prompted again when complete.

NOTE: NO may be selected for “Is vat full?” a maximum of three times.

oThe fourth time NO is selected, the fryer will turn OFF and display “Possible Filter Issue - Check and Resolve”. Press product YES key to acknowledge.

2.3.1Automatic Filtering:

The automated filtering process will open the drain and move oil from the vat to the filter pan, close the drain, and pump oil back to the vat. This allows for a quick filter by passing oil through the filter medium once.

With no cook timers running the display will show

.

To perform an automatic filter, press the key.

If fryer is a split vat, and will be displayed. To perform a filtering operation on the Left vat, press product key [1] (YES), or to perform a filtering operation on the Right vat, press product key [6] (YES).

The display will show – press product key [6] (YES) to confirm.

Follow the “Initiate Check List” procedures outlined above.

Wait until automated filter process completes.

Follow the “Acknowledge Check List” procedures outlined above.

Display will return to

2.3.2Automatic Polishing:

,

, or

.

The automated polishing process will open the drain, moving oil from the vat to the filter pan, and then run the return pump. Oil will cycle through the vat and the filter pan, making multiple passes through the filter medium. After a set amount of time, the drain will close and oil will be pumped back to the vat. This allows for a longer filtering process to remove more debris from the oil – extending oil life and increasing oil quality.

With no cook timers running the display will show

To perform an automatic polish, press the key.

If fryer is a split vat, and

.

will be displayed. To

perform a filtering operation on the Left vat, press product key [1] (YES), or to perform a filtering operation on the Right vat, press product key [6] (YES).

The display will show – press product key [0] (NO) to skip.

The display will show – press product key [6] (YES) to confirm.

Follow the “Initiate Check List” procedures outlined above.

Wait until automated filter process completes.

Follow the “Acknowledge Check List” procedures outlined above.

Display will return to

,

, or

.

L22-378 Rev 3 Page 10 of 44