Solstice I12+ Cooking Computer for ROV Fryers
Pitco P/N 60149517 & 60149518
7To Change Options Level 2 ( for the Store Manager):
The display must show | from section 2 to change these options. When the |
product key [0] is pressed, the display will show . Indicator
lights above product keys will illuminate to represent options that may be changed. Each option listed below uses the product key [0] to toggle or scroll through available choices in the
display. When the correct value is displayed, | save choice. The | |
display will again return to | for another option selection. |
7.1Fahrenheit or Celsius Display:
|
The Controller will display temperatures in the Fahrenheit or Celsius scales. The default scale is °F.
With display showing
, press the product key [10/0].
Display shows | . |
Press product key 1, display shows [DEGREE n] [F OR C], where “n” is the current setting.
Use the product key [0] to scroll through choices (F or C). | save |
|
choice.
Display shows
.
7.2Password Change or Required:
With factory settings, an operator password is not required to enter programming Levels 1 and 2. The password may be activated or changed in these steps.
With display showing
, press the product key [0].
Display will show | . |
Press product key 2, display shows [SET PAS] [NEW PASS]. Use the product key [0] to
scroll through choices [NO PASS] or [PASS REQ]. | save choice. |
|
If [NO PASS] is selected Display returns to | . |
If [PASS REQ]. is selected, display will show [PASSnnnn] [NEW PASS] to prompt for new password. Displayed value “nnnn” is the current password. Use the product keys for numeric
entry to change password. Press [P] key to save choice. Display then shows
.
Note: The factory default password (6684) will always work even if a different password is selected here.
Page 20 of 44 |