Problem |
| Action |
| |
|
| |||
| • Make sure the Auto Detergent and Auto Softener settings are | |||
|
| properly configured. |
| |
| • Make sure you use the recommended types of detergent as | |||
Excessive suds. |
| appropriate. |
| |
• | Use high efficiency (HE) detergent to prevent oversudsing. | |||
| ||||
| • Reduce the detergent amount for soft water, small loads, or | |||
|
| lightly soiled loads. |
| |
| • |
| ||
|
| |||
| • Make sure the remaining amount of detergent and fabric | |||
Cannot apply |
| softener is not over the limit. |
| |
• | Make sure the Auto Dispense function is activated, with both | |||
additional detergent. | ||||
| the Water Hardness and Concentration settings properly | |||
|
| |||
|
| specified. |
| |
|
|
| ||
| • Plug the power cord into a live electrical outlet. |
| ||
| • Check the fuse or reset the circuit breaker. |
| ||
| • Close the door and press or tap Start/Pause to start the | |||
|
| washing machine. |
| |
|
| For your safety, the washing machine will not tumble or spin | ||
|
| unless the door is closed. |
| |
| • | Before the washing machine starts to fill, it will | make a series | |
|
| of clicking noises to check the door lock and does a quick | ||
Stops. |
| drain. |
| |
| • There may be a pause or soak period in the cycle. Wait briefly | |||
|
| and the washing machine may start. |
| |
| • Make sure the mesh filter of the water supply hose at the | |||
|
| water taps are not clogged. Periodically clean the mesh filter. | ||
| • | If the washing machine is not supplied with sufficient power, | ||
|
| the washing machine temporarily will not drain or spin. As | ||
|
| soon as the washing machine regains sufficient | power, it will | |
|
| operate normally. |
| |
|
|
|
| |
Troubleshooting
English 53
WD90K6400OW_03745G_EN.indd 53
2016/7/27 13:47:38