Operating Instructions

ARMING

To arm the alarm and lock the doors, press the Lock button of your Factory Keyless Remote Control. The 882 OEM system will sense the Door Lock signal and Arm. The lights will flash once, the vehicle horn or siren will chirp once. After 3 seconds, the LED indicator will begin flashing slowly and Immobilizer circuits become active. This system is now armed and ready to protect the vehicle.

ALARM TRIGGERING:

If there is an intrusion into the vehicle or hard impact to the body the alarm will sound which consists of flashing lights and siren or pulsing car horn for 30 seconds. After the 30 second alarm cycle duration the system will stop, but is still armed. LED will begin flashing rapidly indicating the alarm has been triggered.

DISARMING:

To disarm the CS-882 OEM, press the Unlock button of your Factory Keyless Remote. The CS-882 OEM system will sense the Door Unlock signal and Disarm. The lights will flash twice and the vehicle horn or siren will chirp twice. The LED will stop flashing. If the system was tripped in your absence, then the siren or horn will chirp 4 times and the lights will flash 4 times. If your hear 4 chirps/flashes, we recommend inspecting your vehicle for a theft attempt or damage.

PASSIVE ARMING MODE (Programmable Option)

When programmed for Passive (Automatic Last Door Arming) the CS-882 will arm itself 30 Seconds after the ignition is turned off and the last door has been closed. If a door is reopened, the system will wait for the door to close before arming. Enabling this option may entitle you to an insurance discount. Check with your provider.

DUAL-STAGE SHOCK PROTECTION

If a low-level shock to the vehicle body is detected, the pre-warning sensor activates sounding 1 siren/horn chirp and one light flash. If a hard impact to the vehicle occurs, the system will trigger for 30 seconds. Adjust the shock sensor as needed by turning the control knob clockwise to increase sensitivity and counter-clockwise to decrease sensitivity.

EMERGENCY OVERRIDE/DISARM

If the CS-882 system is armed and you have lost your Factory Keyless Remote or it stops working, you will have to perform an emergency override. Enter your vehicle manually with the key, (this will trip the alarm) turn the Ignition ON, and press override/program button 5 times within 8 seconds to disarm the system. The system will chirp/flash 4 times when disarmed.

CS-882 OEM specifications

Crimestopper Security Products has long been a trusted name in vehicle security, and their CS-882 OEM model exemplifies their commitment to providing reliable, advanced safety solutions. The CS-882 is a comprehensive security system designed specifically for ease of use and peak performance, tailoring design elements to fit seamlessly into most vehicle types.

One of the standout features of the CS-882 is its two-way communication system. This allows owners to receive real-time alerts about their vehicle's security status, enhancing peace of mind whether the vehicle is parked at home or in a crowded parking lot. The system incorporates a range of advanced sensors, including a shock sensor that gauges impacts or disturbances. This helps prevent unauthorized access or tampering, protecting the vehicle and its contents effectively.

The CS-882 also boasts a remote start capability. This not only adds convenience for users, enabling them to start their vehicle from a distance, but also increases security by allowing users to heat or cool their vehicle while maintaining safety. This remote start functionality can also be integrated into modern vehicles equipped with push-start ignition systems, showcasing its versatility.

Another integral feature is the keyless entry system, which enhances user accessibility. This technology eliminates the need for traditional keys, allowing users to unlock their vehicles with a simple button press, which is especially useful in scenarios where carrying a key might be cumbersome. The system is designed for reliability and speed, ensuring that access to the vehicle is quick and efficient.

In terms of its build quality, the CS-882 OEM is constructed from durable materials to withstand the rigors of everyday use. It features a compact design that ensures easy installation without compromising the internal aesthetics of the vehicle. The system is designed for compatibility with various car makes and models, making it highly versatile.

Additionally, the CS-882 uses advanced technology to minimize false alarms, which can be a nuisance in standard alarm systems. This ensures that users receive alerts only for genuine threats, maintaining the system’s effectiveness and reliability. Overall, Crimestopper's CS-882 OEM model stands out as a robust vehicle security solution, combining advanced technology, user-friendly features, and solid construction to protect your vehicle from theft and unauthorized access.