Crimestopper Security Products CS-882 OEM guide

WIRING

PINK & PINK/WHITE WIRE: ON-BOARD RELAY (10A) IMMOBILIZER CIRCUIT #2 NORMALLY OPEN These wires come directly from the terminals of an on-board relay to immobilize the Coil or Fuel Pump Circuit in the vehicle. Select the circuit you want to immobilize, cut it, and connect one end to the Pink wire and the other end to the Pink/White wire.

NOTE (1): This is a high-security, normally open connection. If the alarm system is unplugged or loses power, the circuit will still be immobilized!

NOTE (2): This circuit has a maximum load of 10A and should NOT be used to interrupt a high current wire such as an Ignition supply or Starter circuit from the ignition switch!

YELLOW WIRE: +12 VOLTS IGNITION SWITCHED

Connect to an Ignition wire that shows +12 Volts with the key in both “On” and “Start” positions.

BLACK/WHITE WIRE: +12 VOLTS POWER TRUNK RELASE INHIBIT INPUT (If Equipped)

Connect this wire to the positive side of trunk release solenoid. This input wire will allow the CS-882OEM system to sense when the Trunk Release Button is pressed on the Factory Remote Control. This will prevent an unwanted false alarm if your vehicle has a powered trunk/hatch release. At the instant a positive pulse is sensed on this wire, the trunk trigger and shock sensor inputs are bypassed so the 882 will not trigger. If the trunk is then closed (sensed by trunk pin) it will re-arm in 3 seconds, otherwise remaining parts of the 882 system are STILL ARMED EVEN THOUGH THE TRUNK IS OPEN and must be disarmed by Unlocking with the remote before entering the vehicle.

BLUE WIRE: (-) or (+) DOOR TRIGGER (PROGRAMMABLE, DEFAULT = NEGATIVE) Connect to door pin activation circuit in vehicle:

∙Negative type door circuits show Ground when any door is opened and 12 volts when all doors are closed. Some vehicles may have isolated door triggers. In this case you may need to run additional wires from other doors or go directly to the wire at the vehicle’s dome light.

∙Positive type door circuits show 12 Volts when a door is opened such as on many Ford/Mercury vehicles.

*TIP: Many recent vehicles have door pin switches incorporated in the door latch mechanism itself, therefore there are not any “plunger” type door switches located in the door jamb. If your vehicle has no door pins, an alternative connection may be at an interior light or locating the door triggers at a control module elsewhere in the vehicle. Call Tech Support for assistance.

CS-882 OEM specifications

Crimestopper Security Products has long been a trusted name in vehicle security, and their CS-882 OEM model exemplifies their commitment to providing reliable, advanced safety solutions. The CS-882 is a comprehensive security system designed specifically for ease of use and peak performance, tailoring design elements to fit seamlessly into most vehicle types.

One of the standout features of the CS-882 is its two-way communication system. This allows owners to receive real-time alerts about their vehicle's security status, enhancing peace of mind whether the vehicle is parked at home or in a crowded parking lot. The system incorporates a range of advanced sensors, including a shock sensor that gauges impacts or disturbances. This helps prevent unauthorized access or tampering, protecting the vehicle and its contents effectively.

The CS-882 also boasts a remote start capability. This not only adds convenience for users, enabling them to start their vehicle from a distance, but also increases security by allowing users to heat or cool their vehicle while maintaining safety. This remote start functionality can also be integrated into modern vehicles equipped with push-start ignition systems, showcasing its versatility.

Another integral feature is the keyless entry system, which enhances user accessibility. This technology eliminates the need for traditional keys, allowing users to unlock their vehicles with a simple button press, which is especially useful in scenarios where carrying a key might be cumbersome. The system is designed for reliability and speed, ensuring that access to the vehicle is quick and efficient.

In terms of its build quality, the CS-882 OEM is constructed from durable materials to withstand the rigors of everyday use. It features a compact design that ensures easy installation without compromising the internal aesthetics of the vehicle. The system is designed for compatibility with various car makes and models, making it highly versatile.

Additionally, the CS-882 uses advanced technology to minimize false alarms, which can be a nuisance in standard alarm systems. This ensures that users receive alerts only for genuine threats, maintaining the system’s effectiveness and reliability. Overall, Crimestopper's CS-882 OEM model stands out as a robust vehicle security solution, combining advanced technology, user-friendly features, and solid construction to protect your vehicle from theft and unauthorized access.