Crimestopper Security Products CS-882 OEM operating instructions Installation Mode a Most Vehicles

INSTALLATION MODE “A” (Most Vehicles)

MODE A is the default mode and is used for most vehicles.

This mode requires 4-Wires to be connected for proper operation: Yellow/Black and Blue/Black connect to the

(+)12V solenoid lock & unlock wires. Green/White and Red/ White connect to the factory door lock switch. The polarity (+/-) of the Green/White and Red/White wires can be changed by using the slide switch on the top of the CS-882OEM module. See Diagrams below for standard MODE “A” installation.

YELLOW / BLACK
	BLUE / BLACK
GREEN / WHITE
	RED / WHITE
L	+ / - LOCK SWITCH WIRE *
	FACTORY
	POWER	(+) LOCK / MOTOR WIRE
U	LOCK
	RELAYS	(+) UNLOCK / MOTOR WIRE
	+ / - UNLOCK SWITCH WIRE *
LOCK
SWITCH	(*Programmable for POS/NEG validation)

The slide-switch on the top of the module determines the polarity of Green/White and Red/White “Validate” Wires. Connecting the Green/White and Red/White “Validation” wires to the factory door lock switch prevents an intruder or thief from arming or disarming the system by pressing the lock/unlock button on the vehicle door panel.

(TOP EDGE OF 882 MODULE)

POSITIVE VALIDATION INPUTS

(TOP EDGE OF 882 MODULE)

NEGATIVE VALIDATION INPUTS

6