Inspect the Unit Before Installing

Installation Instructions

FHP

WARNING: Watch for pinch points. Do not put your fingers between movable parts.

1.Carefully inspect the FHP for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation until the carrier has reviewed the damage.

NOTE: Read all instructions before starting installation.

2.Lay out components to ensure you have all the required parts before proceeding (see FHP drawing on page 2).

FHP INSTALLATION

WARNING: It is the responsibility of the installer to verify that the surface to which the FHP is anchored will safety support the combined load of all attached components and equipment.

Install the FHP as follows:

1.Determine the exact mounting location prior to installation, considering the unit’s swing radius.

WARNING: Improper installation can result in serious per- sonal injury! Make sure that the structural mem- bers can support a redundant weight factor five times the total weight of the equipment: if not, reinforce the structure before installing the FWP.

2.Secure the ceiling plate at the desired location.

3.Thread the outer column with pipe adapter securely into the ceiling plate (see Figure 1).

4.Using the set screw, secure the outer column in the ceiling plate.

5.Install the inner column into outer column at desired height and secure using socket head cap screw, Nylon washer, and lock nut (see Figure 2).

Figure 1. Outer Column Installation

Figure 2. Mount on Outer Column

FHP18-110 specifications

The Chief Manufacturing FHP18-110 is a sophisticated piece of equipment designed to meet the demanding needs of the automotive service industry. This hydraulic floor jack is engineered specifically for both performance and durability, making it an essential tool for mechanics and automotive enthusiasts alike.

One of the standout features of the FHP18-110 is its impressive lifting capacity. It can handle loads up to 18,000 pounds, making it suitable for a wide range of vehicles, from compact cars to heavier trucks and SUVs. This heavy-duty capacity is supported by a robust design that ensures stability during operation, a critical factor when dealing with heavy loads.

The FHP18-110 is equipped with a powerful hydraulic system that provides smooth and efficient lifting. This system allows for rapid lifting and lowering of vehicles, helping to enhance productivity in busy workshop environments. The hydraulic pump is designed for longevity, minimizing the need for frequent maintenance and ensuring consistent performance over time.

A notable characteristic of the FHP18-110 is its low-profile design. This feature allows it to easily slide under low-clearance vehicles, making it highly practical for a variety of automotive applications. The jack's saddle is designed to provide a secure grip on the lifting points of the vehicle, which is essential for safe operation.

Safety is further enhanced through the inclusion of safety valves that prevent overloading. This technology ensures that the jack will not exceed its maximum lifting capacity, providing peace of mind while working on heavy vehicles.

The FHP18-110 is also designed with user comfort and efficiency in mind. It features an ergonomic handle that allows for easy maneuverability and optimal leverage during lifting operations. The wheels are built for smooth rolling, which can significantly reduce the effort needed to position the jack under a vehicle.

In conclusion, the Chief Manufacturing FHP18-110 stands out in the automotive service industry thanks to its impressive lifting capacity, advanced hydraulic mechanism, low-profile design, and user-friendly features. This jack not only enhances the efficiency of automotive repairs but also prioritizes safety and durability. Whether in a professional shop or for personal use, the FHP18-110 is a reliable tool that professionals can count on.