Remote control
Installing batteries in the remote control
1.Remove the battery compartment cover at the rear of the remote control by depressing the retaining clip.
2.Install two AAA batteries as shown, ensuring the polarity matches that shown in the battery compartment.
3.Replace the battery compartment cover.
Using the remote control
To use the remote control, point it at the box and press the required buttons.
You must be within 6 metres and at an angle of less than 30 degrees from the centre of the box.
Note: Sunshine or other strong light sources may interfere with the signal from the remote control. In this situation turn the box away from the light source.
WARNING! DO NOT LEAVE BATTERIES IN THE REMOTE CONTROL FOR EXTENDED PERIODS AS THEY CAN LEAK O R C O R R O D E C A U S I N G DAMAGE TO THE REMOTE C O N T R O L . C H E C K T H E M PERIODICALLY AND REPLACE THEM AS REQUIRED.
W A R N I N G ! D O N O T M I X B A T T E R Y T Y P E S . W H E N I N S E R T I N G B A T T E R I E S , REPLACE ALL BATTERIES AT THE SAME TIME. DO NOT MIX OLD AND NEW BATTERIES.
W A R N I N G ! E X H A U S T E D BATTERIES MUST BE TREATED WITH CARE AND DISPOSED OF ACCORDING TO ANY SAFETY OR RECYCLING REGULATIONS IN FORCE IN YOUR LOCAL AREA. NEVER DISPOSE OF BATTERIES INTO GENERAL WASTE, OR FIRE.
11
