Operating the box
3.Press the OK button to begin.
4.You are asked to confirm whether you want to proceed. Press the OK or BACK button if you do not want to
5.The box searches for and displays all the available TV and radio channels.
6.Once the automatic search has been completed, all channels are stored and the first available channel is shown.
Note: You should
Note: You should
Factory reset
You can restore the default settings for your box to the original factory values:
1.Press the MENU button.
2.Press the▼ button to select the ‘Install’ option.
3.Press the ◄ and ►buttons to select the ‘Factory Reset’ option.
4.Press OK to begin.
5.You are asked to confirm that you want to proceed. Press the OK or BACK button if you do not want to
press ►and then OK to confirm.
Once the "OK" button press, a password require dialog display, enter the correct password to perform the factory reset (default password is 0000).
CAUTION: RETURNING THE
BOX TO ITS FACTORY DEFAULT
CLEARS ALL SETTINGS.
THE PIN IS RESTORED TO THE
DEFAULT ‘0000’ VALUE
Note: To prevent accidental erasure,factory reset does not reset the Channel Zero settings in your box.
To perform a full reset that includes also the Channel Zero settings, press the following sequence of buttons: MENU, 2, 7, 1, 8, 2, 8, 4, 5, 9, 0.
The box will go into standby automatically
Version
The Version menu shows hardware and software information.
To see the version number:
1.Press the MENU button, then press the
▲/▼ / ◄ and ► buttons to navigate to
23