Mitsubishi Electronics WD-73740, WD-82CB1 Using the TV Speakers as a Center Channel, Hdmi cable

161. Additional TV Features

Supplemental Audio Connections (840 series), continued

Using the TV Speakers as a Center Channel

If using an external surround sound system, you can use the TV’s speakers to provide center channel sound. Your A/V receiver must have a center channel pre out that can supply an amplified center-channel signal to the TV.

1.Connect your A/V receiver’s HDMI output and center channel pre out to the TV as shown.

AUDIO/SURROUND

R -OUTPUT- L

DIGITAL

AUDIO

OUTPUT

EXTERNAL

CONTROLLER

INPUT

			CENTER SUB WOOFER					L
			INPUT		OUTPUT
		HDMI				ANT	3D	CENTER
				USB-P LAN			GLASSES
1	2	3	4				EMITTER	INPUT R

2.Turn on the A/V receiver’s center channel pre out if needed. See the A/V receiver’s instruction manual.

3.Enable the TV’s center channel mode. Press the AUDIO key and press to display the TV Speakers option. Press to select Center.

4.Compare the center channel volume from TV’s speakers to the rest of the sound system. If the center channel volume needs adjustment,

a.Press AUDIO and press to display the Center Level volume slider.

b.Adjust TV speaker volume using the keys.

c.Compare the center channel volume to the rest of the sound system. Repeat this adjustment if needed.

HDMI cable

A/V receiver with HDMI output

Surround sound	HDMI OUT
source device

RCA/RCA audio cable

CENTER

CHANNEL

PRE OUT

For assistance call 1(800) 332-2119