ChannelView Channel Listings

61. Additional TV Features

ChannelView displays program descriptions sent by broadcasters. This information may be unavailable in some areas.

About ChannelView

ChannelView™ shows memorized channels on the ANT input. It displays channel names and program information for digital channels. No program information is displayed for analog channels.

ChannelView allows you to set up three banks of custom channels for convenient access. You can save groups of channels by content (e.g., news, sports, children’s program- ming) or by TV user.

Note: You must ﬁrst set the TV Clock to receive cor- rect ChannelView listings. Use the Setup > Clock menu.

ChannelView “All” tab. Programs are listed on the right.

Using ChannelView Listings

Task	Action
Display/hide	Press GUIDE.
ChannelView listings
(ANT input only).

Move through channels	Press or .
one by one.

Move through channels	Press and hold CH.
quickly.

Jump to listings for a	Enter the channel number.
specific channel.	Press CANCEL once to add a
	dash; press CANCEL twice to
	clear the channel number.

Tune to a highlighted	Press ENTER.
channel.

Update program infor-	Press the INFO key (the
mation for a highlighted	screen may briefly go
digital channel.	blank).

Display program descrip-	1.	Press	to move into
tions, if available. The		the program area.
description will appear at	2.	Press	to move
the bottom of the screen.		between programs.

Display more program	Press INFO.
description for the current
channel (if available).

For assistance call 1(800) 332-2119

ChannelView Custom Channel Banks

Select a channel bank to customize.

1.Press GUIDE to display ChannelView.

2.Press MENU to move the highlight to the bank header.

3.Press to select Bank 1, 2, or 3.

4.With the bank name highlighted, press ENTER to enter setup mode where you can select channels to include in the bank.

Task	Action
Move between banks	Press	.

Move into the channel list	Press .

Add or delete a channel	• Highlight the channel
from the bank	and press ENTER. A
	check indicates the
	channel has been
	added.
	• Press ENTER again to
	clear the check and
	remove the channel.

Remove all channels	Press CANCEL.
from the selected bank

Enter or exit setup mode	Press MENU.

5.Press EXIT when finished with setup.

Using Custom Channel Banks

•While watching TV, press CH. The TV will tune only to channels stored in the current bank.

•To change to a different channel bank:

1.Press GUIDE.

2.Press MENU.

3.Press to highlight the desired bank.

4.Press EXIT.

•To allow tuning to any channel in memory, select the All bank.