Mitsubishi Electronics 840 SERIES Resolving CEC Conflicts, Removing an Hdmi Device, Direct Keys

Page 35

3 HDMI Control of CEC Devices

35

Resolving CEC Conflicts

Because each manufacturer selects which CEC func- tions to support, some devices may conflict with other devices. If control conflicts arise, you can:

Turn off TV control of an individual CEC-enabled device (see below).

Turn off CEC in the device itself. Refer to the device’s Owner’s Guide for instructions.

Turning Off the TV’s HDMI Control of a CEC Device

1.Press MENU on the TV remote control.

2.Highlight Inputs > HDMI Control.

3.Move to the device name and press ENTER to select Off to turn off the TV’s ability to control the device.

4.Press EXIT to clear the menu.

Inputs > HDMI Control menu

Removing an HDMI Device

1.Power off the device.

2.Disconnect the HDMI cable.

3.Press MENU on the TV remote control to enter the TV main menu.

4.Go to Inputs > Name.

5.Highlight the HDMI input name and press ENTER to select Delete.

6.Press EXIT to clear the menus.

Inputs > Name menu with Delete selected for HDMI-3.

Using HDMI Control

As an example of using HDMI Control, press PLAY on the device itself to:

Power on the TV

Switch to the device (no need to display the Input Selection menu)

Begin play of the device

Direct Keys

Test your equipment with the TV’s remote control to find additional supported commands. See the table below for commands that may be available, depending on the individual device.

CEC-enabled VCR, DVD, and DVR functions that may be available:

Record/

Menu

Channel

Other

Playback

Navigation

Tuning

 

 

 

 

 

CH

GUIDE

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

Digits 0–9,

TOOLS

 

 

 

CANCEL

Check the

 

 

 

 

 

 

 

 

 

TOOLS menu

 

 

 

CANCEL

 

 

 

 

ENTER

for supported

 

 

 

(to cancel)

 

functions.

 

 

 

 

 

 

 

 

 

 

 

If you have a CEC-enabled A/V receiver, CEC-enabled devices connected to the A/V receiver with an HDMI cable may also be controllable. They can be selected from the TV’s Input Selection menu.

CEC-enabled A/V receiver functions. Try the VOL, MUTE, and menu-navigation keys.

For assistance call 1(800) 332-2119

Image 35
Contents Mail us at TVsupport@mevsa.com SeriesTV Model Stand Model Stand RequirementContents Outdoor Antenna Grounding Replacement PartsFAV Favorites Sleep TimerSetting the Sleep Timer Viewing or Changing the Sleep TimerAbout ChannelView Using ChannelView ListingsUsing Custom Channel Banks ChannelView Channel ListingsDVD Image Definitions Picture Shape and Display FormatsFormat Definitions Effect of Mitsubishi Formats on Picture TypesAbout Channel Numbers Signal DefinitionsStatus Display On the 840 series More On TV Inputs and OutputsHdmi Inputs High-Definition Multimedia Interface HDMI-4 offeredANT Antenna USB-P Power OnlyUSB LANDVI Video Connection Connecting a Computer to the TVHdmi Connection TV jack panel Audio Unused Using the TV with an Audio-Only DeviceSpecialized TV Connections Photos and Motion Video as Composite VideoDistortion in Computer Images Computer Video AdjustmentsImage Resolution Subwoofer with Audio Cable Wireless SubwooferSupplemental Audio Connections 840 series Adding a SubwooferSet Sound Global Analog Audio Out to Rear External Rear SpeakersHdmi cable Using the TV Speakers as a Center ChannelPicture Main MenuPicture Reset Picture Advanced Picture PerfectPicture Mode Sound Audio SoundSound SoundPro Sound GlobalSound Auto SP Captions Setup Timer SetupSetup Language Setup ClockAnt Air, Ant Cable Setup ChannelAdding/Deleting Channels Using the Channel Edit Menu Setup Network Setup EnergyPC, AVR, Delete InputsInputs Name CD/Audio, MP3 Player, VCRInputs Demo Inputs UpdateInputs Control Inputs OrderParental Menu LockTV Locks Pass CodeBypassing TV Locks Using TV LocksTips for Using the Lock Menu Lock Parental Lock Other Lock TimeLock Channel Lock PanelDevice does not have CEC compatibility Action Enabling Hdmi Control CEC DevicesHas No Hdmi Control Option Hdmi cable cannot support CEC ActionBox OptionalHDMI, you can use any Turning Off the TV’s Hdmi Control of a CEC Device Using Hdmi ControlResolving CEC Conflicts Removing an Hdmi DeviceAppendix a TV Care Installing the Remote Control BatteriesCleaning Recommendations Care of the Remote ControlLamp Part Number 915B455011 Allow it to cool for at leastOne hour before attempting to Replace the lamp cartridgeRemoving the Old Lamp Cartridge Use only replacement lamp part number 915B455011Replacement Procedure Installing the New Lamp CartridgeService Appendix B TroubleshootingService and Customer Support Mode menuTV Channels Symptom Remarks Change Lamp Energy from Standard to Bright TV Power On/Off Symptom RemarksPicture Symptom Remarks Check that Digital Audio Output and/or AVR Audio Output Sound Symptom RemarksTrademark and License Information Mitsubishi TV Software GNU General Public License Conveying Verbatim Copies Acceptance Not Required for Having Copies GNU General Public License No Warranty Mitsubishi Home-Cinema Television Limited Warranty U.S. Only Warranty51 For assistance call 1800 Warranty53 Third Party Services Content Disclaimer Internet Access Required for Third Party Services UpdatesAvailability of Content on Third Party Services Index TVsupport@mevsa.com Lamp-Substitution Alert