Samsung SWA-9000S/XE Check if the Link LED is solid blue connection complete, LED status Action

7. Check if the LINK LED is solid blue (connection complete)

STANDBY

LINK

LINK

Blue is On

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Receiver Module.

8.If the SWA-9000S does not connect, take the necessary steps according to the LED Indicator’s status

	LED status		Action
	On	Connected with	-
		the Soundbar
LINK (Blue)
	Blinking	Connection	Check if the Soundbar is turned on
		standby status	Repeat steps 4 through 7.
			Check if the Soundbar is turned on
			1. Press the ID SET button on the back
			of the Wireless Receiver Module with
			a pen tip for 5~6 seconds until the
			LINK LED indicator blinks (in Blue).

STANDBY (Red)	On	Connection failure		5 Sec
		L	R	ID SET
		SURROUND SPEAKERS OUT
		SPEAKER IMPEDANCE : 3Ω

ID SET

2. Repeat steps 4 through 7.

Others - Errors Contact a Samsung Service Centre.

ENG - 11