Automaticlockisstillengaged,

4. When the cleaning time has been completed, the indicator word CLEAN will turn oft. The indicator word LOCK will remain on until the oven has cooled. When the oven has

cooled, the indicator word LOCK will turn off and the door will automatically unlock.

Automaticlockisstillengaged,

Doorcannotbe openeduntil

LOCKis no longer displayed.

After Self-Cleaning

About one hour after the end of the clean cycle, the lock will disengage and the LOCK indicator word will turn off At this point, the door can be opened.

Some soil may leave a light gray, powdery ash which can be removed with a damp cloth. If soil remains, it indicates that the clean cycle was not long enough. The soil will be re-

moved during the next clean cycle.

If the oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and embossed rack

supports with a small amount of vegetable oil to restore ease of movement.

A white discoloration may appear after cleaning if acid or sugary foods were not wiped up before the clean cycle. This discoloration is normal and will NOT affect performance.

Care and Cleaning

If you want the stop time to be 1:00, press the number pads "1,0,0". Four seconds later the display will show 1:00 and the indicator word DELAY.

6. When the oven begins to clean, the clean icon (top and bottom bars) will come on. The indicator word DELAY will go off.

7. When the clean time has been completed, the indicator word CLEAN will turn off. The indicator word LOCK will

remain on until the oven has cooled. When the oven has cooled, the indicator word LOCK will turn offand the door

will automatically unlock.

TO Cancel Self-Clean

1.Press the Stop/Clear pad. The door will be locked while the LOCK indicator word remains in the display.

Depending on the length of time the oven had been cleaning, it may take up to an hour for the oven to cool down. When the oven is cool, the door will automatically unlock and it can be opened.

To Delay the Start of a Clean Cycle

1-3. Follow steps I-3 on page 15.

4.

Press

the

Stop Time pad. Indicator words STOP TIME

 

 

will flash

in the display and the calculated stop time will

 

 

also appear in the display.

 

5.

Press

the appropriate number pads to enter the stop time

s0me Smoke

you desire. (A stop time can only be accepted for later in the day.)

Example: If at 9:00 you set the oven to clean for three hours, the calculated stop time would be "12:00". The display will show:

Page 17
Image 17
Jenn-Air JGW9130 warranty Care and Cleaning, After Self-Cleaning, TO Cancel Self-Clean, To Delay the Start of a Clean Cycle