Jenn-Air JGW8130 Before Self-Cleaning, Setting the Controls for a Self-CleanCycle, forheavysoil

Care and Cleaning

Self-Clean		Oven
						To prevent damage, do not clean or rub the gasket around
AS	elf,-Clean CAUTIONS			.....		the oven door. The gasket is designed to seal in heat during
						the clean cycle.
						Wipe up excess grease or spillovers from the oven bottom to
		: '	'	:	:	prevent excessive smoking, flare-ups or flaming during the
						clean cycle.
						Wipe up sugary and acid spillovers such as sweet potatoes,
						tomato or milk-based sauces. Porcelain enamel is acid re-
						sistant, not acid proof. The poreelain finish may discolor if
		' '	:	'	: ;	acid spills are not wiped up prior to a self-clean cycle.
• Do not use commercial oven c_ners				Onthe self-c!ehn

The self-clean cycle uses above normalcooking temperatures to automatically clean the entire oven interior.

It is normal for excessive flare-ups and smoking to occur during cleaning if the oven is heavily soiled. It is better to

clean the oven regularly rather than to wait until there is a heavy build-upof soil in the oven.

During the cleaning process, the kitchen should be well ventilated to help eliminate normal odors associated with cleaning.

Before Self-Cleaning

Turn off the oven light before cleaning as the light may burn out during the clean cycle,

Remove broiler pan, all pans and the oven racks from the oven. The oven racks will discolor and may not slide easily after a self-clean cycle.

Clean oven frame, door frame (area outside the door gasket) and around the open- ing in the door gasket with a nonabrasive cleaning agent such as Bon Ami or deter- gent and water. These areas are not exposed to cleaning temperatures and should be

cleaned to prevent soil from baking on during the clean cycle.

Setting the Controls for a Self-Clean Cycle

1.Close the oven door.

2.Press the Clean pad.

•The indicator word CLEAN will flash. The display

will show " : " along with the oven icon _.

•If the door has not been closed, the display will show "door".

3.Press Preset (0) pad for "3:00" hours of cleaning time for an average soiled oven.

•The cleaning time can be varied depending on the

amount of soil. Press the appropriate number pads to set any amount of time between 2 and4 hours. "2:00" hours

of cleaning for light soil, up to "4:00" hours of cleaning

forheavysoil.

•Four seconds after entering the cleaning time, the oven door will automatically lock. The indicator word LOCK will appear in the display along with the clean icon (top and bottom bars).