Clock Controlled Oven Cooking
The clock controlled oven cooking feature is used to turn the oven offat apreset time of day or delay the startand then turn off the oven.
The clock must be functioning and set at the correct time
of day for this feature to operate correctly.
The feature can be used with either oven cooking or self- cleaning. See page 16for instructions on delaying the start of a clean cycle.
Oven Operation ]2
3. Press the Cook Time pad. The indicator words COOK TIME will flash and the display will show "0HR:00".
4.Press appropriate number pads to enter cooking hours and minutes.
Example: If cooking time selected for baking is 2 hours and 30 minutes, the display will show:
5.At the end of the programmed Cook Time, the oven will shut off automatically, "End" will appear in the display and a beep will be heard four times. Press the Stop/Clear pad.
If the program is not canceled, there will be one beep every 30 seconds for five minutes. (If you wish to change the reminder signal at the end of clock controlled cooking, see page 6.)
To Delay the Start and Turn Off Automatically:
Setting the Controls
To Start Immediately and Turn Off Automatically:
1.Press the Bake or Convect Bake* pad.
• The indicator word BAKE will flash.
• 000 and the oven icon | will appear, |
•When convection cooking is selected, a fan icon _ will also appear.
*Convection cooking available on select models only.
2.Press the Preset (0) pad to set 350°F. (When convection cooking, 325°F will be automatically set.) Or press the appropriate number pads for the desired oven temperature.
5.Press the Stop Time pad. Indicatorwords STOP andTIME will flash. Display will show the calculated stop time based on the current time of day and the cook time that you entered previously.
6.Press the appropriate pads to enterthe time you wish the
oven to stop. A stop time can only be accepted for laterin
theday.
Example: If at 10:00 you set the oven for 350°F and 2 hours and 30 minutes of cooking time, the calculated stop
time would be "12:30".
If you wantthe stop time to be 1:00, press the numberpads
"1,0,0". Four seconds later, the display will show 1:00 along with the indicator words DELAY, STOP TIME.
