EVENT Function
This controller provides a maximum of 3 EVENTs (EV1~EV3) for respectively setting EV functions as shown in the following Table <1>. For example, if EV1 is used for Run/Stop selection, when the controller is set to RUN status, if terminals in the Option1 slot are open, the controller is in RUN status; if terminals in the Option1 slot are shorted, the controller switches to STOP status.
Function setting | 0 | 1 | 2 |
| 3 | 4 |
Function | Disable | Run/Stop | SV 1/ SV 2 |
| Auto/ | Run/ Hold |
| Manual | |||||
|
|
|
|
|
| |
| Table <1> EVT function setting |
|
| |||
Run/Stop: This function switches the controller between RUN and STOP status.
SV 1/SV 2: This function selects SV 1 or SV 2 as the active setpoint.
Auto/Manual: This function selects PID and Manual control.
Run/Hold: This function switches controller between run and hold status when in program control.
¾Insert EV1, EV2 PCB to Option1 or Option2, or insert hardware with a
¾Set EV functions as listed in Table <1> EVT Function Setting by parameters 
, 
, 
in【Regulation Mode】. Note: Selection of “Evt‘x’” items must match with the inserted PCB; if only Option1 is inserted, then only “Evt1” will be displayed.
Limits of temperature ranges
Different input sensors have different application ranges (e.g.: J type factory setting is | (upper | |
limit) / | (lower limit) in Initial Setting Mode. |
|
If lower limit is altered to 0 and upper limit is altered to 200, the limit function will be enabled in the following conditions: |
| |
¾When setting the SV value, the limits may set for 0~200℃
¾In
User Setting of F1, F2 function keys
In the Operation Mode, (PV/SV display mode), pressing a function key more than 3 seconds will prompt you to the setting of the following
functions; press 
keys to make a selection.
Function |
| Description |
| When in a screen other than the PV/SV display mode, pressing F1/F2 key continuously may save the setting, to quickly | |
MENU | switch the menu screen |
|
| (When the screen shows KEY SAVE, the menu screen is saved) | |
AT | Selecting this function, F1 / F2 button can be used for quick ON / OFF operation of AT function | |
Selecting this function, F1 | / F2 button can be used to switch between RUN/STOP status. | |
|
|
|
PROG | Selecting this function, F1 | / F2 button can be used to switch between RUN/HOLD status. |
|
|
|
ATMT | Selecting this function, F1 | / F2 button can be used to switch between PID and MANUAL control mode |
For disabling F1/F2 function, please select 【MENU】 without saving any menu screen.
Edit a self-defined Menu Screen
Hidden MENU setting: Lock all buttons by adjusting parameter 
to 
in 【Operation Mode】. At the same time press 
and 
keys for 3 seconds to display 
, and enter 
, see the following table for details. Select “Hide” to hide the Menu.
Menu Layer setting: Lock all buttons by adjusting parameter 
to 
in 【Operation Mode】. At the same time press 
and 
keys for 3 seconds to display 
, and enter 
, see the following table for details. Selectable items are NOR= display layers; ADJ= adjust layers; SET= set layers.
Menu layer reset: Lock all buttons by adjusting parameter | to | in 【Operation Mode】. At the same time press | and | ||
keys for 3 seconds to display | , and enter | (Level reset) parameters, select | |||
to reset all menu layers to default setting. |
|
|
|
| |
| RUN layer |
| Adjust layer | ||
Menu No. |
| Corresponding menu | Menu No. |
| Corresponding menu |
M101 |
|
| M201 |
|
|
|
|
|
|
|
|
M102 |
|
| M202 |
|
|
|
|
|
|
|
|
Setting layer
Menu No. |
| Corresponding menu |
M301 |
|
|
M302 |
|
|
|
| |
|
|
|
14
