Samsung HW-K440/XE Connecting to a TV Using a Digital Optical Cable, ++Auto Power Link, Mode

CONNECTIONS

CONNECTING TO A TV

●● Important: Before you begin, put the battery into the remote. See page 10 for instructions.

CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE

Optical Cable

OPTICAL OUT	DIGITAL AUDIO IN
	(OPTICAL)

DIGITAL AUDIO IN (OPTICAL)

1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.

2. Press the	button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.

++Auto Power Link

If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.

1.Connect the Soundbar and a TV with a digital optical cable.

2. Press the	button on the main unit’s right side or the SOURCE button on the remote control to select the
D.IN mode.

3.Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.

●● Auto Power Link is set to ON by default.

●● Depending on the connected device, Auto Power Link may not function.

20