Samsung HW-K440/XE manual Connecting the Subwoofer, Connecting to the Subwoofer Automatically

CONNECTIONS

CONNECTIONS

●● Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.

●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

CONNECTING THE SUBWOOFER

CONNECTING TO THE SUBWOOFER AUTOMATICALLY

The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are turned on.

•When the subwoofer is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and glows continuously. The subwoofer’s LED indicator modes are listed below:

1	blue	Auto-connection is complete.
2	blinkingblue	Auto-connection is not complete.
3	blue is	a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
	not lit	b. If the power cord is plugged in correctly, check the Soundbar main unit.
		If your Soundbar main unit is off (in standby mode), the subwoofer will also be in standby
		mode and the blue LED won't be lit.

CONNECTING TO THE SUBWOOFER MANUALLY

If the blue LED light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by following the steps below.

●● Important: Before you begin, put the battery into the remote. See page 10 for instructions.

16