ViewSonic VS12114-1M Connecting the LCD TV, Using the F Connector, Getting Started, English

Getting Started

Connecting the LCD TV

Using the F Connector

The F connector is supplied for an artistic reason: to hide the Cable or VHF/ UHF antenna from being seen from the front. Connect one end of the F connector to the TV input jack, and connect the other end with the Cable or VHF/UHF antenna.

Cable System or VHF/UHF Antenna System

Enjoy the high-definition and standard-definition digital programming along with standard- definition analog programming.

☼

•This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna.

•We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable (not supplied) to ensure the best picture quality.

Cable or VHF/UHF

75-ohm coaxial cable Rear of TV VHF/UHF/CABLE input

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and antenna programming, as shown below.

A-B RF switch

Cable

ENGLISH

Antenna

☼

Rear of TV VHF/UHF/CABLE input

•Remember to set the TV Source setting in the CHANNEL menu to Air or Cable for the type you choose.

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

ViewSonic 17 N1630w