Pioneer CDJ-800 manual Connections, Connecting control cord to allow relay play, Before Operations

BEFORE OPERATIONS

CONNECTIONS

÷Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.

1. Connecting to a DJ mixer (DJM-300, DJM-500, DJM-600, DJM-3000) (sound output and CONTROL terminal connection)

Use the supplied audio cables. Connect the white plug to the L (left) terminal and the red plug to the R (right) terminal.

Connect the supplied control cord to enable control of the unit from the mixer to allow fader start play and back cue.

Connecting DJM-600

Supplied audio cable

Supplied control cord

Supplied

control

cord

Supplied

audio

cable

÷Connections for the DJM-300 and DJM-500 are similar; use the supplied audio cables to connect the mixer’s CD1 jacks to Player A, and CD2 jacks to Player B. When using the DJM-3000, Player A is connected to LINE 1 of CH-1, and Player B is connected to LINE 3 of CH-2.

2. Connecting control cord to allow relay play

Alternate playback can be automatically performed when the CONTROL terminals of two units are connected with the supplied control cord. ☞ P. 15

Supplied control cord

7

<DRB1333>

En