Pioneer CDJ-800 manual Features

BEFORE OPERATIONS

FEATURES

The CDJ-800 compact disc player is designed for use by DJs providing all the func- tions and performance required in disco clubs while offering performance, sound quality and functionality superior to any analog player.

JOG DIAL

The large 206 mm diameter Jog dial enables better handling than an analog turntable.

PITCH BEND

This function changes the music tempo depending on direction of Jog dial rotation and speed of movement.

SCRATCH PLAY

In the VINYL mode when the surface of the Jog dial is pressed playback is discon- tinued and then continues according to the direction and speed the dial is rotated. You can also adjust the startup when the Jog dial is touched and released to create new DJ techniques.

FRAME SEARCH

Moves the disc from pause position in frame increments (1/75 sec) when the Jog dial is rotated in pause mode.

SUPER FAST SEARCH

You can search the disc faster than normal search or track search by holding down a SEARCH button or TRACK SEARCH button as you turn the Jog dial.

ON JOG DISPLAY

The center of the jog dial displays information regarding disc status, cue point position, sound memory status, Jog dial touch-detection, and VINYL mode.

CUE

BACK CUE

After storing the Cue point in memory, press the CUE button while playing the unit to go back to the Cue point and start over.

AUTO CUE

Auto cue automatically locates the song’s start point even if it differs from the track’s frame, allowing the player to start instantly at a press of the PLAY/PAUSE button.

CUE POINT SAMPLER

The sound from the memorized cue point can be reproduced by one touch, which can be used as the start point check and the sampler.

REAL TIME SEAMLESS LOOP

This function simplifies setting and releasing loops. This function lets you set a loop while you are playing a track. A loop can also be set at the end of the track so that the track does not stop. In addition, an ADJUST mode has been added to enable one-touch adjustments to Loop-out point and facilitate loop operation.

AUTO BEAT LOOP

This function uses the track’s BPM to automatically set a loop out point and per- form loop play.

RELOOP

Allows you to replay a loop any number of times.

Press the RELOOP button after releasing loop play to return to the loop start point. Clever use of on and off in combination with the rhythm make it possible to create new sound effects.

CUE/LOOP MEMORY

This player is equipped with an internal memory that permits the recording of one disc cue point or loop point per disc; the recorded points can later be recalled as desired.

QUICK RETURN

In the VINYL mode, merely touching the Jog dial’s top surface will initiate a quick return to the cue point.

REVERSE PLAY

When the reverse button (REV) is pressed so that the button’s indicator lamp lights, play is performed in the reverse direction.

TEMPO CONTROL

100mm high-precision slider coupled with a 0.05% increment digital display (within a ±10% range) allows exact control of speed to make tempo ad- justments easy and accurate.

TEMPO CONTROL RANGE

The maximum variable range can be set to two variable ranges: ±10% and ±100% to facilitate adjustment.

MASTER TEMPO

Changes music tempo without changing pitch.

PLAYING ADDRESS

This bar graph provides a visual representation of track playback progress that enables you to see current playback position just like you can on an analog record by checking needle position. The length of the bar shows current position and a flashing bar provides advance notice of track end.

SLOT IN

Discs are loaded directly without opening doors or trays, making track selection that much faster.

FADER START

Quick start and back cue can be performed using the fader function on DJ mixers DJM-500, DJM-600, DJM-300 and DJM-3000 (all mixers are sold separately).

MULTI READ

CD-R, CD-RW discs can be replayed. (However, due to certain special characteris- tics of some discs, recorders as well as dirty or damaged discs, some discs may not replay properly.)

6

<DRB1333>

En