Desa 30 owner manual Spark Plug Removal, 70/90/150,000 BTU/Hr Models

Page 13

Spark Plug

(70/90/150,000 BTU/Hr Models)

1.Remove upper shell (see page 10).

2.Remove fan (see page 19).

3.Remove spark plug wire from spark plug.

4.Remove spark plug from burner head using 13/16" open-end wrench.

5.Clean and regap spark plug electrodes to .055"

(1.4 mm) gap.

6.Install spark plug in burner head.

7.Attach spark plug wire to spark plug.

8.Replace fan (see page 19).

9.Replace fan guard and upper shell.

(70/90,000 BTU/Hr Model Shown)

Spark Plug

BurnerWire

Head

Spark

Plug

SPARK PLUG REMOVAL 70, 100 &150 PFA/P 031A

Figure 18 - Spark Plug Removal, 70/90/150,000 BTU/Hr Models

Bend Here to Adjust Gap

.055" (1.4 mm) Gap

Figure 19 - Spark Plug Gap, 70/90/150,000 BTU/Hr Models

13

099606

Image 13

Contents ReDDY HeaTeR Contents Carbon monoxide poisoning may lead to death Safety InformationProduct Identification Tools Needed Unpacking AssemblyOperation TheoryFuels To Start Heater Ventilation OperationTo Stop Heater Operation Storage Preventative Maintenance ScheduleTo Restart Heater How Often How To TROUBLE- ShootingUpper Shell Removal Service ProceduresFuel Filter Remove side cover screws using 5/16 nut-driver Spark Plug Removal, 30,000 BTU/Hr Model Spark PlugSpark Plug Removal, 70/90/150,000 BTU/Hr Models Air Output, Air Intake, and Lint Filters Pump Pressure AdjustmentRemoving Air and Fuel Line Hoses, 30,000 BTU/Hr Model NozzleRemoving Burner Head, 70/90,000 BTU/Hr Models Removing Burner Head, 150,000 BTU/Hr Model Rotor Location, 30/70,000 BTU/Hr Models Pump RotorFan Specifications30,000 BTU/Hr Parts BreakdownKEY Part Number Description QTY Parts List70,000 BTU/Hr Burner Head AssemblyFHPF3-2C 90,000 BTU/Hr M10908-2 Screw, #6-32 x 3/8 150,000 BTU/Hr IllustratedNPC-4C Wheels and Handles for Wiring Diagram, 30,000 BTU/Hr Wiring DiagramsAccessories 099606 Certificate of General Equipment Limited 90 DAY Warranty Warranty and Repair Service

Related manuals

Manual 40 pages 14.56 Kb