Desa 30, 90, 70 owner manual Ventilation Operation, To Start Heater

Page 7

VENTILATION

OPERATION

!WARNING

Follow the minimum fresh, outside air ventilation requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater.

Provide a fresh air opening of at least three square feet (2800 square cm) for each 100,000 BTU/Hr rating. Provide extra fresh air if more heaters are being used.

Example: A 150,000 BTU/Hr heater requires one of the following:

a two-car garage door raised six inches (15.24 cm)

a single-car garage door raised nine inches (22.86 cm)

two, thirty-inch (76.20 cm) windows raised twelve inches (30.48 cm)

!WARNING

Review and understand the warnings in the Safety Information Section. They are needed to safely operate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all ventilation and safety information.

2.Fill fuel tank with kerosene or No. 1 fuel oil.

3.Attach fuel cap.

4.Plug power cord of heater into standard 230 volt/50 hertz, grounded (earthed) outlet. Use an extension cord if needed. Use only a three-wire, grounded (earthed) extension cord.

Extension Cord Wire Size Requirements

Up to 100 feet (30.5 meters) long, use 16 AWG (1.0 mm2) conductor

101 to 200 feet (30.6 to 61 meters) long, use 14 AWG (1.5 mm2) conductor

Heater will start when power cord is plugged into outlet. If not, push in flame- out control reset button (see Figures 6 thru 8).

 

 

 

 

Flame-Out

Flame-

 

 

Control

 

 

Reset

Out

 

 

Button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

 

 

Button

 

 

 

 

 

 

Figure 6 - Flame-Out Control Reset

Figure 7 - Flame-Out Control Reset

Button, 30/70,000 BTU/Hr

Button, 90,000 BTU/Hr

 

Continued

 

 

 

7

099606

Image 7
Contents ReDDY HeaTeR Contents Carbon monoxide poisoning may lead to death Safety InformationProduct Identification Tools Needed Unpacking AssemblyOperation TheoryFuels To Start Heater Ventilation OperationTo Stop Heater Operation Storage Preventative Maintenance ScheduleTo Restart Heater How Often How To TROUBLE- ShootingUpper Shell Removal Service ProceduresFuel Filter Remove side cover screws using 5/16 nut-driver Spark Plug Removal, 30,000 BTU/Hr Model Spark PlugSpark Plug Removal, 70/90/150,000 BTU/Hr Models Air Output, Air Intake, and Lint Filters Pump Pressure AdjustmentRemoving Air and Fuel Line Hoses, 30,000 BTU/Hr Model NozzleRemoving Burner Head, 70/90,000 BTU/Hr Models Removing Burner Head, 150,000 BTU/Hr Model Rotor Location, 30/70,000 BTU/Hr Models Pump RotorFan Specifications30,000 BTU/Hr Parts BreakdownKEY Part Number Description QTY Parts List70,000 BTU/Hr Burner Head AssemblyFHPF3-2C 90,000 BTU/Hr M10908-2 Screw, #6-32 x 3/8 150,000 BTU/Hr IllustratedNPC-4C Wheels and Handles for Wiring Diagram, 30,000 BTU/Hr Wiring DiagramsAccessories 099606 Certificate of General Equipment Limited 90 DAY Warranty Warranty and Repair Service
Related manuals
Manual 40 pages 14.56 Kb