Installing (continued) | GB |
These instructions address specialised installers and serve as a guide for installation, adjustment and maintenance in conformity with the laws and regulations inforce.
Installing into the countertop.
The appliance is made for fixing into a worktop, as shown in the relevant figure. Apply the supplied sealant to the entire perimeter of the hob and insert it into the fitment hole (for sizing see fig. 3).Fix the appliance into the worktop with the 4 stays, rotat- ing them according to the top’s depth (fig. 4)
30 mm
40 mm
Fig. 3
mm 510
50 | mm |
| |
Min | |
560 | mm |
|
50 | mm |
| |
Min | |
580 | mm |
|
48 mm | |
53,5 | mm |
| |
Min | |
mm 490
Fig.4
TW966
- 21 -