Samsung C61IDGNO/XEE manual Electrical connection

Installing (continued) GB

������������������������������������� �

�

�����������������������������

�������������������������������������	��
	��

�����������������������������

�������������������������������������	��
	��
	�

�������������������������������

Fig. 7

Electrical connection (Fig.7)

Before making the electrical connections, check that:

-the ground cable is 2 cm longer than the other cables;

-the system ratings meet the ratings indicated on the identification plate fixed on the lower part of the worktop;

-the system is fitted with efficient earthing compliant to the laws and regulations in force.

Earthing is obligatory by law.

If the domestic appliance is fitted with a cable with plug, must be installed in order that the socket is easily accessible.

If the domestic appliance is fitted with a cable without plug, an omnipolar switch must be interposed with a minimum opening of 3 mm be- tween the contacts and suited to the load indicated on the plate and conform to the regulations in force (the yellow/green ground conductor must not be interrupted by the switch). When the appliance has been installed, the omnipolar switch must be easily reachable.

If the appliance is not fitted with a cable, use type:"H05V2V2-F".

At no point must the cable reach a temperature 50°C higher than room temperature.

TW966

- 23 -